Brother TD-4100N 사용자 설명서 - 페이지 17

{카테고리_이름} Brother TD-4100N에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother TD-4100N 37 페이지. Network users manual - spanish
Brother TD-4100N에 대해서도 마찬가지입니다: 기술 사양 (4 페이지), 소프트웨어 사용 설명서 (40 페이지), 네트워크 사용 설명서 (39 페이지), 사용자 설명서 (36 페이지), 매뉴얼 (20 페이지), (스페인어) 구 (40 페이지), (스페인어) 매뉴얼 델 유저리오 (39 페이지)

8 Using Interface Cables

RS-232C cable and Network cable are not standard accessories.

Use an appropriate cable for the interface.

•

USB cable

Use the enclosed interface cable.

•

RS-232C cable

Do not use an interface cable that is longer than 2 metres.

For details, see "Controlling with ESC/P Commands" on page 26.

•

Network cable (TD-4100N)

Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or

100BASE-TX Fast Ethernet Networks.

Important

For USB interface, the included USB interface cable should be used to

ensure compliance with the limits for EMC (Electromagnetic

compatibility).

For serial and network interfaces, a shielded interface cable should be

used to ensure compliance with the limits for EMC.

Changes or modifications not expressly approved by Brother Industries,

Ltd. may affect the performance and print quality, and damage may not

be covered under the limited warranty.

•

Caution for LAN connection

Connect this product to a LAN connection that is not subjected to overvoltages.

•

Caution for RS-232C connection

The RS-232C serial connector part of this equipment is not Limited Power Source.

STEP