AEG 914 550 925 사용자 설명서 - 페이지 9

{카테고리_이름} AEG 914 550 925에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 914 550 925 48 페이지.

Water supply pressure

Water supply

Maximum Load

Spin Speed

1) The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannot

connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your do‐

mestic cold water storage system. Make sure not to exceed a distance of 5.02 m (16.5 ft) between the

appliance inlet hose and the bottom of the water storage tank.

2) Connect the water inlet hose to a water tap with a 3/4'' thread.

5. INSTALLATION

WARNING!

Refer to Safety chapters.

5.1 Unpacking

WARNING!

Remove all the packaging

and the transit bolts before

installing the appliance.

WARNING!

Use the gloves.

1. Remove the external film. If

necessary, use a cutter.

2. Remove the cardboard top and the

polystyrene packaging materials.

Minimum

Maximum

Cotton

Maximum spin speed

0.5 bar (0.05 MPa)

8 bar (0.8 MPa)

Cold water

9 kg

1551 rpm

3. Remove the internal film.

4. Open the door and remove the

polystyrene piece from the door seal

and all the items from the drum.

ENGLISH