Brother Work Smart MFC-J475dw 빠른 시작 매뉴얼 - 페이지 7

{카테고리_이름} Brother Work Smart MFC-J475dw에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother Work Smart MFC-J475dw 35 페이지. Work smart series inkjet all-in-one
Brother Work Smart MFC-J475dw에 대해서도 마찬가지입니다: 에어 프린트 매뉴얼 (12 페이지), 사양 (2 페이지), 빠른 설정 매뉴얼 (37 페이지)

페이지 인쇄

Gently put the paper into the paper tray print

side down and top edge first. Check that the

paper is flat in the tray.

IMPORTANT

Be careful that you do not push the paper in too

far; it may lift at the back of the tray and cause

paper feed problems.

Gently adjust the paper width guides to the

paper with both hands. Make sure that the

paper width guides touch the edges of the

paper.

Close the output paper tray cover.

Slowly push the paper tray completely into the

machine.

While holding the paper tray in place, pull out

the paper support a until it clicks, and then

unfold the paper support flap b.

Check the print quality

When the preparation process has finished, the

LCD shows Load Paper and Press

Colour Start.

Press Colour Start.

Check the quality of the four colour blocks on

the sheet. (black/yellow/cyan/magenta)

If all lines are clear and visible, press 1 (Yes) to

finish the quality check and go to the next step.

If lines are missing, press 2 (No) and follow the

steps on the LCD.

Poor