AEG Automatic washing machines 설치 및 연결 지침 - 페이지 13

{카테고리_이름} AEG Automatic washing machines에 대한 설치 및 연결 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG Automatic washing machines 14 페이지. Aeg automatic washing machines

페이지 인쇄

Water Drainage

The appliance drain hose should hook into a standpipe, the hook in the

drain hose is formed using the plastic "U-Piece" supplied, with an

internal diameter of approximately 38 mm (see diagram) thus ensuring

there is an air break between the drain hose and standpipe.

When discharging into a stand-

pipe ensure that the top of the

curve in the hose end is no more

that 90 cm (35.4'') and no less

than 60 cm (23.6'') above floor

level.

The upright standpipe should

have a minimum, length of

30 cm (12'') from the bottom of

the elbow to the top of the pipe

(see diagram). Make sure that it

is designed in such a way that

the end of the drain hose

cannot be covered with water.

Longer drain hoses are available

in lengths of 2.7 and 4 metres

from your AEG Service Force

Centre.

If you intend the drain hose

from the washing machine to

empty into a sink, make sure

that the sink is empty and the

plug hose is not blocked. Use

the plastic "U-Piece" supplied.

Water Connection

38mm (1

diameter standpipe