AEG AWF8024M3SB 사용자 설명서 - 페이지 26
{카테고리_이름} AEG AWF8024M3SB에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG AWF8024M3SB 40 페이지.
페이지 인쇄
26
www.aeg.com
5.
Clean the filter in the valve with a
stiff brush or a towel.
6.
Install the inlet hose again. Make
sure that the couplings are tight to
prevent leakages.
7.
Open the water tap.
8.8 Frost Precautions
If the appliance is installed in an area
where the temperature can be less
than 0 °C, remove the remaining water
from the inlet hose and the
drain pump.
Emergency Drain
1.
Disconnect the main plug from the
main socket. Turn off the water tap.
2. Remove the water inlet hose.
3. Remove the drain hose from the rear
support and unhook it from sink or
spigot.
4.
Put the end of the drain and inlet hose
in a container. Let the water flow out
of the hoses.
5. When no more water flows, install the
inlet hose and the drain hose again.
NOTE
Make sure that the temperature is
more than 0 °C before you use the
appliance again.