Fujitsu Lifebook A3040 바이오스 매뉴얼 - 페이지 15

{카테고리_이름} Fujitsu Lifebook A3040에 대한 바이오스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Lifebook A3040 24 페이지. Bios setup utility
Fujitsu Lifebook A3040에 대해서도 마찬가지입니다: 소프트웨어 설명서 (29 페이지)

페이지 인쇄

SECURITY MENU – SETTING THE SECURITY FEATURES

The Security menu allows you to set up the data security

features of your notebook to fit your operating needs

and to view the current security configuration. Follow

the instructions for Navigating Through the Setup

Utility to make any changes. (See Navigating Through

The Setup Utility on page 2 for more information.)

The following tables show the names of the menu fields

for the Security menu and its submenus, all of the

options for each field, the default settings and a

description of the field's function and any special

information needed to help understand the field's use.

The default condition is no passwords required and no

write protection.

If you set a password, write it down and

keep it in a safe place. If you forget the

password you will have to contact your

support representative to regain access to

your secured functions and data.

Supervisor Password Is:

User Password Is:

Set Supervisor Password

Set User Password

Minimum User Password Length:

Password on boot:

KB Lock on Resume:

Boot from Removable Media:

Flash Write:

Hard Disk Security

Owner Information

Advanced

On Automatic Wake up:

Figure 11. Security Menu

BIOS SETUP UTILITY

Clear

[Enter]

[0]

[Disabled]

[All]

[Enabled]

S e c u r i t y M e n u

■

Entering a password incorrectly 3 times

in a row will cause the keyboard and

mouse to be locked out and the warning

[System Disabled] to be displayed.

If this happens restart the computer by

turning off and on the power with the

power switch and use the correct pass-

word on reboot.

■

If you make an error when re-entering

the password a [Warning] will be dis-

played on the screen. To try again press

the Enter key and then retype the pass-

word. Press the Esc key to abort the

password setting process.

■

If the Power Management Security is

Enabled and the Password on Boot is

Disabled you will not have to type your

password upon resuming the system

from the Suspend or Save-to-Disk

modes. Power Management Security

will work only if Password boot is

enabled.

Press <Enter> key to

set Supervisor Password

to enable any password

features.

The password entry is

required to enter BIOS

Setup.

F1: Help

Esc: Exit