Fujitsu LIFEBOOK AH532 매뉴얼 - 페이지 11
{카테고리_이름} Fujitsu LIFEBOOK AH532에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu LIFEBOOK AH532 18 페이지. Fujitsu lifebook uh552 uh572
Fujitsu LIFEBOOK AH532에 대해서도 마찬가지입니다: 데이터시트 (2 페이지), 데이터시트 (3 페이지), 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
- 1. Fujitsu Lifebook
- 2. AH / LH Series BIOS
- 3. Bios Setup Utility
- 4. Navigating through the Setup Utility
- 5. Info Menu - Displays Basic System Information
- 6. System Menu - Setting Standard System Parameters
- 7. Advanced Menu - Setting Device Feature Controls
- 8. Security Menu - Setting the Security Features
- 9. Item Specific Help
- 10. Hard Disk Security
- 11. Security Chip
- 12. Boot Menu - Selecting the Operating System Source
- 13. Exit Menu - Leaving the Setup Utility
Table 6: Fields, Options and Defaults for Security
Menu Field
Supervisor
Password is:
User Password is:
Set Supervisor
Password
Set User Password
Password on Boot:
Hard Disk Security
TPM (Security Chip)
Setting
Exiting from the Security Menu
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or
move to another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish
to move to another menu, use the cursor keys.
Options
Default
–—
Clear
–—
Clear
–—
[Enter]
–—
[Enter]
Disabled
[Disabled]
Enabled
–—
---
---
---
S e c u r i t y M e n u
Description
A display-only field. Set is displayed when the system supervisor
password is set and Clear when it is not.
A display-only field. Set is displayed when the general user
password is set, and Clear when it is not.
Sets, changes or cancels the Supervisor Password. The Supervi-
sor Password may be up to seven characters long and must
include only letters or numbers (no symbols). Passwords are
NOT case-sensitive. To cancel a password press the Enter key
instead of entering characters in the Enter New Password field
and in the Re-enter New Password field. When a Supervisor
Password is set it must be used to access the BIOS setup utility.
This field can only be accessed if the Supervisor Password is set.
Sets, changes or cancels the User Password. A User Password
may be up to seven characters long and must include only let-
ters or numbers (no symbols). Passwords are NOT case-sensi-
tive. To cancel a password press [Enter] key instead of entering
characters in the Enter New Password field and in the Re-enter
New Password field. When a User Password is set it must be
used to access the BIOS setup utility.
When set to disabled, password entry is not required before the
operating system boots. When enabled, password entry is
required before operating system boot.
Opens the Hard Disk Security submenu
Opens the TPM (Security Chip) Setting submenu. This item is
available on the TPM models only.
11