AEG EWF 1645 지침 책자 - 페이지 25

{카테고리_이름} AEG EWF 1645에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG EWF 1645 26 페이지.

페이지 인쇄

Problem

• The machine vibrates or is noisy:

• The door will not open:

• Spinning starts late or the

laundry is not spun enough:

• Water is not visible in the

machine:

• The machine makes an unusual

noise:

If you are unable to identify or solve the problem,

contact our service centre. Before telephoning,

make a note of the model, serial number and

purchase date of your machine: the Service Centre

will require this information.

Mod. ..........

Prod. No. ...........

Ser. No. .........

P0042 BD

All manuals and user guides at all-guides.com

Possible cause

• The transit bolts and packing have not been

removed.

• The support feet have not been adjusted.

• The laundry is not evenly distributed in the drum.

• Maybe there is very little laundry in the drum.

• The water level is above the bottom edge of the

door.

• The machine is heating the water.

• The drum is turning.

The door could be opened only when «Door

openable» message appears in the display.

• The electronic unbalance detection device has cut

in because the laundry is not evenly distributed in

the drum. The laundry is redistributed by reverse

rotation of the drum. This may happen several

times before the unbalance disappears and

normal spinning can resume. If, after 5 minutes,

the laundry is still not evenly distributed in the

drum, the machine will spin at a lower speed. If at

the end of the programme the laundry is not spun

enough, redistribute the load manually and select

the spin programme.

• The machine, which is the result of modern

technology, runs in a very economical way with

low water consumption. Performance is

nevertheless excellent.

• The machine is fitted with a commutator motor

which improves machine performance.