Brother E-100 사용자 설명서

{카테고리_이름} Brother E-100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother E-100 2 페이지.

페이지 인쇄

User's Guide

English

With your P-touch E100, you can create labels for multiple

applications. Select from the many character sizes and styles to

design professional looking custom labels. In addition, the

variety of tape cassettes available allows you to print labels with

different widths and industrial colours. Read this manual

carefully before you begin and keep the manual in a handy

place for future reference.

Printed in China

LAB665001

Power Supply and Tape Cassette

Cassette

cover

Tape cutter

lever

Open the cassette cover by pressing the

above indicated area at the top end of the

P-touch.

If a tape cassette is already installed, remove it by

pulling it straight up. Also, if batteries are already

installed, remove them.

• Make sure that the power is turned off when

replacing batteries or tape cassettes.

LCD Display & Keyboard

Troubleshooting

Error message

Message

Cause/Remedy

• The batteries are weak.

• If using AAA alkaline batteries: Replace them with

Low Battery!

new ones.

• If using Ni-MH batteries: Charge them fully.

Battery Dead

The installed batteries have expired.

• An invalid number was entered as the label length,

tab length, cable diameter, flag length or faceplate

Invalid!

length.

• An invalid character or number to be ascended was

selected in the Serialize function.

• You tried to print a text file when there is no data

stored in the memory.

No Data!

•

was pressed when no text is entered.

• You tried to enter a 3rd line by pressing

Line Limit!

• You tried to print or preview two lines of text while

3.5mm or 6 mm tape is installed. Install tape of a

larger size.

You tried to print or preview a label when there is no

No Cassette!

cassette installed.

The tape cutter lever was used during the printing

Cutter Error

process.

The maximum number of characters (80 characters for

Text Full!

regular text) has already been entered.

Safety Precautions

Indicates a potentially hazardous

WARNING

situation which, if not avoided,

could result in death or serious

injuries.

Follow these guidelines to avoid the risk of fire, burns, injury,

electric shock, rupture, overheating, abnormal odours or

smoke.

• Always use the specified voltage and the recommended AC adapter

(AD-24ES) to prevent any damage or failure.

• Do not touch the P-touch during a lightning storm.

• Do not use the P-touch/AC adapter in places of high humidity such as

bathrooms.

• Do not overload the power cord.

• Do not place heavy objects on, or damage the AC power cord or plug.

Do not forcibly bend or pull the AC power cord. Always hold the AC

adapter carefully when disconnecting from the power socket.

• Make sure that the plug is fully inserted in the power socket. Do not use

a socket that is loose.

• Do not allow the P-touch/AC adapter/power plug/batteries to get wet, for

example, by handling them with wet hands or spilling fluids on to them.

• If battery fluid leaks and gets in to your eyes, immediately rinse your

eyes with a large amount of clean water and then seek medical attention.

Battery fluid may cause eye damage.

• Do not disassemble or modify the P-touch/AC adapter/batteries.

• Do not allow a metal object to contact both the plus and minus ends of a

battery.

• Do not use sharp or metal objects, such as tweezers or a metallic pen,

to change the batteries.

• Do not throw the batteries into fire or expose to heat.

• Disconnect the AC adapter or remove batteries immediately and stop

using the P-touch if you notice any abnormal odours, heat,

discolouration, deformation or anything unusual while using or storing it.

• Do not use a damaged or leaking battery as the fluid may get on your

hands.

• Do not use a deformed or leaking battery or one with a damaged label.

There is a possibility of generating heat.

Insert six new AAA alkaline batteries

(LR03:not included) or fully charged Ni-

MH batteries (HR03:not included),

making sure that their poles point in the

correct directions.

Users of alkaline batteries:

Always replace all six batteries at the

same time with brand new ones.

Users of Ni-MH batteries:

Always replace all six batteries at the

same time with fully charged ones.

NOTE

Visit us at http://solutions.brother.com/ for the latest

information about recommended batteries.

Size

12. Backspace key

Cursor

13. Cable Wrap key

Caps

14. Cable Flag key

Cable Wrap

15. Character keys

Faceplate

16. Caps key

Cable Flag

17. Symbol key

Label Length

18. Menu key

If a specific label length

19. Clear key

has been selected,

20. Print key

also appears.

21. Enter key

Guidance (left, right)

22. Serialize key

Power key

23. Faceplate key

10. Cursor key: Right

24. Accent key

11. Cursor key: Left

25. Space key

NOTE

• The LCD shows one row of 15 characters; however, the text that

you enter can be up to 80 characters in length.

• While selecting the settings, press the Space key to go back to

the default item.

• The print preview is a generated image of the label, and may

differ from the actual label when printed.

• Label length shown on LCD may slightly differ from the actual

label length when printed.

Message

Cause/Remedy

Since the number of entered characters exceeds the

Text Limit!

label length, reduce the text, or select [Auto] as the

label length.

Printing on 3.5mm tape with invalid Frame setting ON.

No Frame OK?

(Select

to print with no Frame,

cancel.)

Feeding tape after printing when [Chain Print] is

OK to Feed?

selected. Refer to "Setting Margin".

Wrong Tape!

Use a tape cassette with the

CAUTION

Follow these guidelines to avoid personal injury, liquid

leakage, burns or heat.

• When the P-touch is not being used, store it out of the reach of children.

In addition, do not allow children to put the P-touch parts or labels in their

mouths. If any object has been swallowed, seek medical attention

immediately.

• Do not touch metal parts around the print head immediately after

printing.

• Do not touch the cutter blade.

• If leaked fluid from batteries gets on your skin or clothes, immediately

rinse them with clean water.

• Remove the batteries and disconnect the AC adapter if you do not intend

to use the P-touch.

• Do not use a battery other than that specified. Do not use combinations

of old and new batteries or combinations of different types, different

charging levels, different manufacturers or different models. Do not

insert a battery with its plus and minus ends reversed.

• Do not drop or hit the P-touch/AC adapter.

• Do not press on the LCD display.

• Be careful not to trap your fingers when closing the cassette cover.

• Before using Ni-MH rechargeable batteries, carefully read the

instructions for the batteries and battery charger, and be sure to use

them correctly.

• When using Ni-MH rechargeable batteries, charge the batteries with a

specialized battery charger before using the batteries.

General Precautions

• Depending on the location, material, and environmental conditions, the

label may unpeel or become irremovable, the colour of the label may

change or be transferred to other objects. Before applying the label,

check the environmental conditions and the material.

• Do not use the P-touch in any way or for any purpose not described in

this guide. Doing so may result in accidents or damage to the P-touch.

• Use only Brother TZe tapes with the P-touch. Do not use tapes that do

not have the

mark.

Print head

End of tape

Toothed

wheel

Tape guide

Insert a tape cassette, making sure that

it snaps into place.

• Make sure that the end of the tape feeds under

the tape guides.

• Use only Brother TZe tapes with this P-touch.

Specifications

Dimensions:

Approx.110(W) × 208(D) × 59(H)mm

(W x D x H)

Weight:

Approx. 390 g

(without batteries and tape cassette)

Power supply:

Six AAA alkaline batteries (LR03)

Six AAA Ni-MH batteries (HR03)*

AC adapter (AD-24ES)

Tape cassette:

Brother TZe tape (width)

3.5mm, 6mm, 9mm, 12mm

Visit us at http://solutions.brother.com/ for the latest

information about recommended batteries.

What to do when...

Problem

The display stays blank

• Check that the batteries are correctly

after you have turned on

inserted.

the P-touch.

• If the batteries are weak, replace them.

When the label is printed

• See "Setting Margin" in this users guide

out, the margin (space) is

and select [Half] or [Narrow] to have

too large on both sides of

smaller margins for your label.

the text.

The P-touch does not

• Check that the tape cassette has been

mark.

print, or the printed

inserted correctly.

characters are not formed

• If the tape cassette is empty, replace it.

correctly.

• Check the cassette cover is fully closed.

• If the batteries are weak, replace them.

• When the power is disconnected for more

The setting has cleared

than three minutes, all text & formats in

on its own.

the display will be lost. Language and Unit

settings will also be cleared.

• There maybe some dust on the print

head. Remove the tape cassette and use

A blank horizontal line

a dry cotton swab to gently wipe the print

appears through the

head with an up-and-down motion.

printed label.

• The print head can be cleaned more

easily if the optional print head cleaning

cassette (TZe-CL3) is used.

• Only use a soft, dry cloth to clean the P-touch; never use alcohol or other

Indicates a potentially hazardous

organic solvents.

situation which, if not avoided,

• Use a dry cotton swab to clean the print head; never touch the print head

may result in minor or moderate

directly.

injuries.

• Do not put any foreign objects into any part of the P-touch.

• Do not place the P-touch, batteries or AC adapter in direct sunlight or

rain, near heaters or other hot appliances, or in any location exposed to

extremely high or low temperatures (e.g., on the dashboard or in the

back of your car). Avoid high humidity or dusty locations.

• Do not apply excessive pressure to the cutter lever.

• Do not try to print if the cassette is empty; it will damage the print head.

• Do not pull the tape while printing or feeding; it will damage the tape and

the P-touch.

• Any data stored in memory will be lost due to failure or repair of the

P-touch, or if the battery expires.

• The P-touch is not equipped with a charging feature for rechargeable

batteries.

• The length of the printed label may differ from the displayed label length.

• A protective clear plastic sticker is placed over the display during

manufacturing and shipping. This sticker should be removed prior to use.

• When power is disconnected for more than three minutes, all text, format

settings and any text files stored in the memory will be cleared.

We,

Brother Industries, Ltd.

15-1, Naeshiro-cho, Mizuho-ku,

Nagoya 467-8561 Japan

declare that this product and AC adapter are in conformity with the

essential requirements of all relevant directives and regulations

applied within the European Community.

The Declaration of Conformity (DoC) can be downloaded from our website.

Visit http://solutions.brother.com/ and:

• select "Europe"

• select your country

• select your model

• select "Manuals" and your language, then click "Search"

• select Declaration of Conformity

• click "Download"

Your Declaration will be downloaded as a PDF file.

Cutter's

edge

Tape

exit slot

Securely close the cassette cover, making

sure that it snaps into place.

NOTE

When using the AC adapter (AD-24ES)

Connect the AC adapter into the AC adapter socket on

the bottom of the P-touch.

Insert the plug into the nearest standard electrical

socket. For memory back up, we recommend using

AAA alkaline batteries (LR03) or Ni-MH batteries

(HR03) together with the AC adapter.

Initial Settings

Turn your machine on.

Supply power by using six AAA batteries, and then press

Set the language.

[English/Español/Français/Hrvatski/Italiano/Magyar/

Nederlands/Norsk/Polski/Português/Portug. (BR)/

Română/Slovenski/Slovenský/Suomi/Svenska/Türkçe/

Čeština/Dansk/Deutsch]

Set the unit of measurement.

The default setting is [mm].

NOTE

• The machine automatically turns off if no keys are pressed within

five minutes.

• To cancel any operation, press

Problem

Solution

The P-touch has "locked

up" (i.e., nothing happens

when a key is pressed,

even though the P-touch

is on.)

The power turns off when

you try to print.

The tape does not feed

correctly or the tape gets

stuck inside the machine.

All text and format

settings need to be

cleared to create a new

label.

The LCD is set to an

incorrect language.

Contact may differ by country.

Visit our website at http://www.brother.eu/

Declaration of Conformity

(Europe only)

AC adapter socket

[Language]

[Unit]

[inch/mm]

Solution

• Refer to "Resetting the P-touch".

• The batteries may be weak. Replace

them.

• Check that the batteries are correctly

inserted.

• Check that the end of the tape feeds

under the tape guides.

• The cutter lever has been used while

printing. Do not touch the cutter lever

during printing.

• Press

and select [Text&Format].

• Refer to "Initial Settings".

Contact Information