AEG EWF9024P5WB 사용자 설명서 - 페이지 13
{카테고리_이름} AEG EWF9024P5WB에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG EWF9024P5WB 40 페이지.
페이지 인쇄3.4 Options
Temperature Touchpad
Press this touchpad repeatedly to
increase or decrease the wash
temperature if you want your laundry to
be washed at a temperature different
from the one proposed by the washing
machine. (Symbol "
cold wash)
Spin Selection Touchpad
Press this touchpad repeatedly to
increase or decrease the spin speed or
select Rinse Hold, if you want your
laundry to be spun at a speed different
from the one proposed by the washing
machine.
No Spin (
)
No spin option eliminates all the spin
phases and increase the number of
rinses.
Rinse Hold (
By selecting this option the water of
the last rinse is not emptied out and
the drum turns regularly to prevent the
laundry creases.
The door is still locked to indicate that
the water must be emptied out.
The door stays locked with the
water in the drum. To continue
the cycle, you must press
(Start/Pause).
Time Manager
This option allows you to adjust the wash
time. Press this touchpad repeatedly to
decrease or increase the wash time
according to the soil level of your wash.
Use the table below as a guide.
Soil Level
Light
>>
Medium
" corresponds to
)
>>
Heavy
Delay End (
Before you start the program, this option
makes it possible to define the end of the
washing program from minimum of 1 hour
to maximum of 20 hours.
If program duration is longer than
3 hours, minimum Delay End
option starts from 4 hours.
Press the Delay End touchpad to choose
the end time as you wish. The display
shows the number of hours and the
indicator beside the touchpad is on.
This option must be selected after
choosing the wash program, and
before pressing the "Start/Pause"
touchpad.
For example, if the program duration of
your selected program is 3.20 hours and
you define the "Delay End" time to 6
hours. This means your wash program
will finish in 6 hours. (See diagram)
"Delay End" Time : 6 hrs.
Countdown
2.40 hrs.
Pressed
Start the
Start/Pause
Program
After selecting Delay End time, press
Start/Pause touchpad to start the
program. Machine will then countdown
and update time on the display every
hours until it reaches the starting point of
the wash cycle.
If you wish to modify or cancel Delay End
option after starting the program, follow
the steps below:
-
set the washing machine to PAUSE by
pressing "Start/Pause" touchpad;
-
deselect this option by pressing
"Delay End" touchpad repeatedly till
the display shows delay time "
press the "Start/Pause" to start the
-
program.
ENGLISH
13 1 3
ENGLISH
) Touchpad
Working Cycle
3.20 hrs.
End of
Cycle
";