Brother Innov-is 1000 매뉴얼 - 페이지 39

{카테고리_이름} Brother Innov-is 1000에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother Innov-is 1000 42 페이지. Users manual - spanish
Brother Innov-is 1000에 대해서도 마찬가지입니다: 사용자 설명서 (1 페이지), 빠른 참조 매뉴얼 (26 페이지), 사용자 설명서 (1 페이지), 사용자 설명서 (1 페이지), 빠른 참조 매뉴얼 (26 페이지), (영어) 사용자 가이드 (1 페이지)

Brother

Go for stretch fabrics!

Cover Stitch

Feet

Brother Cover Stitch is a great machine for sewing stretch fabrics.

Using optional presser feet gives you more professional results.

Belt Loop Guide

Use this guide to make belt loops or straps of 11 mm (1/2 inch) wide.

1. Set up your machine for 6 mm (approx. 1/4") wide stitch, two needles,

three threads stitch.

2. Attach LC1 presser foot included in the machine.

3. Insert the tab on the belt-loop-sewing attachment into the front cover slot.

4. Make 25 mm (1") a fabric strap, and press 6 mm (approx. 1/4") of one side

(lengthways).

5. Insert the fabric strap into the tape guide of the Belt Loop Guide.

6. Sew.

SA223CV

Bias Tape Folder

Folds and attaches 12 or 12.7 mm (1/2 inch) wide bias tape.

You can use either self-made or store-bought bias tape.

1. Set up your machine for 6 mm (approx. 1/4") wide stitch, two needles,

three threads stitch.

2. Attach LC1 presser foot included in the machine.

3. Insert the bias tape into the bias tape folder attachment.

4. Sew.

SA222CV

Double Fold Binder

Attaches 12 mm (approx. 1/2 inch) wide fabric tape as making it by

folding 40 or 42 mm (approx. 1-1/2 inches) wide fabric.

1. Prepare a 40/42 mm (approx. 1-1/2") wide fabric tape.

2. Attach TB presser foot included in the machine.

3. Set the fabric tape through the folding binder, and set it under the presser foot.

4. Pull the fabric tape behind the presser foot.