Fujitsu Lifebook B3010D 바이오스 매뉴얼 - 페이지 11
{카테고리_이름} Fujitsu Lifebook B3010D에 대한 바이오스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Lifebook B3010D 38 페이지. Lifebook b series
Fujitsu Lifebook B3010D에 대해서도 마찬가지입니다: 바이오스 매뉴얼 (28 페이지)
페이지 인쇄
Table 4: Fields, Options and Defaults for the Serial/Parallel
Port Configurations Submenu of the Advanced Menu
Menu Field
Options
Serial Port:
• Disabled
• Enabled
• Auto
I/O Address:
• 3F8 - 3FF
• 2F8 - 2FF
• 3E8 - 3EF
• 2E8 - 2EF
Interrupt:
• IRQ 3
• IRQ 4
• IRQ 5
Infrared Port:
• Disabled
• Enabled
• Auto
Mode:
• IrDA
• FIR
I/O Address:
• 3F8-3FF
• 2F8-2FF
• 3E8 - 3EF
• 2E8 - 2EF
Interrupt:
• IRQ 3
• IRQ 4
• IRQ 5
I/O address:
• 100 - 107
• 108 - 10F
• 110 - 117
• 118 - 11F
DMA Channel:
• DMA 1
• DMA 3
Parallel Port:
• Disabled
• Enabled
• Auto
Mode:
• Output Only
• Bi-directional
• ECP
I/O address:
• 378 - 37F
• 278 - 27F
• 3BC - 3BF
Interrupt:
• IRQ 5
• IRQ 7
Default
Description
[Enabled]
Configures the serial port using either no configuration
(Disabled), a user defined configuration (Enabled), or by
allowing the BIOS or OS to choose the configuration (Auto).
[3F8 - 3FF]
Allows user to set the serial port base I/O address when serial port
is Enabled.
[IRQ 4]
Allows user to set the serial port interrupt when serial port
is Enabled.
[Enabled]
Configures the infrared port using either no configuration
(Disabled), a user defined configuration (Enabled), or by
allowing the BIOS or OS to choose the configuration (Auto).
[FIR]
When the infrared port is enabled this option is available allowing
the user to set the mode for the infrared port.
[2E8 - 2EF]
Allows user to set the infrared port I/O address when the
infrared port is Enabled.
[IRQ 3]
Allows user to set the infrared port interrupt when the infrared
port is Enabled.
[118 - 11F]
Allows user to set the infrared port I/O address when the
infrared port is Enabled.
[DMA 3]
Allows user to set the infrared port DMA Channel when the
infrared port is Enabled.
[Enabled]
Configures the parallel port using either no configuration
(Disabled), a user defined configuration (Enabled), or by
allowing the BIOS or OS to choose the configuration (Auto).
[Bi-directional]
When the parallel port is enabled this option is available allowing
the user to set the mode for the parallel port. Bi-directional allows
two-way transfer of information between your notebook and a
connected parallel device. Output Only (Half Duplex) allows
information to be transferred in only one direction, from your
notebook to the printer or similar device. ECP Mode allows
communication with the ECP class of parallel I/O devices.
[378 - 37F]
Allows user to set the parallel port base I/O address when the
parallel port is Enabled.
[IRQ 7]
Allows user to set the parallel port interrupt when the parallel
port is Enabled.
A d v a n c e d M e n u
11