Fujitsu LifeBook B6110D 바이오스 매뉴얼 - 페이지 5
{카테고리_이름} Fujitsu LifeBook B6110D에 대한 바이오스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu LifeBook B6110D 27 페이지. Lifebook b series
Fujitsu LifeBook B6110D에 대해서도 마찬가지입니다: 바이오스 매뉴얼 (38 페이지), 시작하기 매뉴얼 (2 페이지)
페이지 인쇄
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies what ATA/
ATAPI devices are installed.
Main
Type:
Total Sectors::
Maximum Capacity:
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
F1
Help
ESC
Exit
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Type:
LBA Format
Total Sectors:
Maximum Capacity:
Multi-Sector Transfers:
LBA Mode Control:
PhoenixBIOS Setup Utility
Advanced
Security
Primary Master [TOSHIBA MK4025GAS-(PM)]
[Auto]
LBA Format
78140160
40008MB
[16 Sectors]
[Enabled]
[Multiword DMA 2]
[Disabled]
Select Item
-/Space
Select Menu
Enter
Figure 2. Primary Master Submenu
Options
Default
• Auto
[Auto]
• None
___
___
___
___
___
[16 Sectors]
[Enabled]
___
Note: Actual hard drive label shown may vary. Depending
on the drive type, information such as cylinders, heads and
sectors may or may not be displayed.
Power
Boot
Info
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Change Values
Select
Sub-Menu
Description
Selects the ATA/ATAPI device type. Select Auto to have the type automati-
cally identified by the BIOS at POST. If None is selected, none of the follow-
ing Set-up items appear.
Logical Block Addressing (LBA)
The total number of sectors on your hard disk
The maximum capacity of your hard disk
This option cannot be changed when Auto is selected; it is automatically
selected.
Enables or disables logical Block Addressing in place of Cylinder, Head, Sector
addressing. This option cannot be changed when Auto is selected; it is auto-
matically selected.
M a i n M e n u
Exit
Item Specific Help
F9
Setup Defaults
F10
Save and Exit
5