Fujitsu LifeBook B6220 바이오스 매뉴얼 - 페이지 25

{카테고리_이름} Fujitsu LifeBook B6220에 대한 바이오스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu LifeBook B6220 30 페이지. Lifebook b series

Fujitsu LifeBook B6220 바이오스 매뉴얼

Boot Device Priority Submenu of the Boot Menu

The Boot Device Priority submenu is for setting the order of checking of sources for the operating system.
Be aware of the operating environment when booting from a CD or you may overwrite files by mistake.
A bootable CD-ROM has either a floppy disk or a hard drive format. When a bootable CD-ROM is
used, drive allocations change automatically without changing the BIOS setup. If floppy disk format is
used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if the
internal hard drive is not present or is disabled. A bootable CD-ROM cannot use a C: designation if a
formatted internal hard drive is present since the C: designator is always reserved for the internal hard
drive.The boot sequence ignores new drive designations, but your application software will use the new
designations.
In order for a portable USB memory device (e.g., JumpDrive or memory stick) to be recognized in the
Boot Device Priority list, it must have been installed before booting the system.
Note that some older portable USB memory devices may not be recognized as bootable devices.
The Boot Menu can also be invoked outside of the Setup Utility using the TrustedCore menu or the [F12]
key. See Using the TrustedCore Menu for more information.
Main
Advanced
Boot priority order:
1:
Floppy Disk Drive
2:
Drive0: FUJITSU MHV2040BH
3:
Drive1: None
4:
CD/DVD Drive
5:
NETWORK: B02 D00 Yukon PXE
6:
7:
8:
Excluded from boot order:
:
USB MEMORY: None
:
USB HDD: None
F1
Help
ESC
Exit
PhoenixBIOS Setup Utility
Security
Power Savings
Boot Device Priority
Select Item
-/Space
Change Values
Enter
Select
Select Menu
Figure 16. Boot Device Priority Submenu
B o o t M e n u
Boot
Item Specific Help
Keys used to view or
configure devices:
<+>/<Space> or <->
moves the device up or
down.
<x> exclude or include
the device to boot.
F9
Setup Defaults
Sub-Menu
F10
Save and Exit
25