Fujitsu LifeBook C series 바이오스 매뉴얼 - 페이지 10
{카테고리_이름} Fujitsu LifeBook C series에 대한 바이오스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu LifeBook C series 31 페이지. Bios setup utility
Fujitsu LifeBook C series에 대해서도 마찬가지입니다: 소프트웨어 설명서 (39 페이지)
페이지 인쇄
L i f e B o o k C S e r i e s N o t e b o o k B I O S
Table 3: Fields, Options and Defaults for the Primary Slave Submenu of the Main Menu
Menu Field
Options
LBA Mode
Disabled
n
Control:
Enabled
n
Transfer Mode:
Standard
n
Fast PIO 1
n
Fast PIO 2
n
Fast PIO 3
n
Fast PIO 4
n
Multiword DMA 1
n
Multiword DMA 2
n
Ultra DMA
Disabled
n
Mode:
Mode 0
n
Mode 1
n
Mode 2
n
Mode 3
n
Mode 4
n
Mode 5
n
Exiting from Main Menu
When you have finished setting the parameters on this
menu, you can either exit from the setup utility, or move
to another menu. If you wish to exit from the setup
utility, press the [Esc] key or use the cursor keys to go to
the Exit menu. If you wish to move to another menu, use
the cursor keys.
10
Default
Description
[Disabled]
Enables or disables Logical Block Addressing in place of
Cylinder, Head, Sector addressing. This option cannot be
changed when Auto is selected.
[Standard]
Selects the method for moving data to/from the drive.
Autotype the drive to select the optimum transfer mode.
This option cannot be changed when Auto is selected.
Multi-word DMA is automatically set to mode 1 for Fast
PIO 1, Fast PIO 2, Fast PIO 3, and set to mode 2 for Fast
PIO 4/DMA.
[Disabled]
Selects the method for moving data to/from the drive.
Autotype the drive to select the optimum transfer mode.
This option cannot be changed when Auto is selected.