AEG KO-LAVAMAT 88840 사용자 설명서 - 페이지 13

{카테고리_이름} AEG KO-LAVAMAT 88840에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG KO-LAVAMAT 88840 48 페이지. Aeg prosteam condenser dryer user manual

fill up the steam water tank with distilled water. Otherwise, you will not be able to start

any ProSteam programme.

Pull drawer containing condensed water contain-

er out a little 1, then pull the water tank's filler

neck 2

Important! Only fill the water tank with dis-

tilled or fully desalinated water. Do not use

tap water or additives! You can also use the

condensed water from the tank, as long as you

filter it first (use the canister supplied with

the filter fitted: see picture opposite).

Fill with distilled water from the canister provided,

up to the MAX mark inside the container.

Push filler neck and drawer with condensed water

container back in.

When dry, all textiles not specifically prohibi-

ted in the chapter 'Sorting and preparing

laundry' may be treated with the ProSteam

System. Wet textiles may only be treated if

they are labelled as suitable for dry pro-

grammes.

Water recirculation system

This system allows you to use for a ProSteam cycle the condensed water automatically

collected in the condense water tank during a drying cycle.

The water in the condense water tank will never automatically fill the steam water tank.

The water recirculation system works only if it is supplied by water arising during standard

drying cycles.

To activate this system turn the valve to the ON position. When the valve is ON the steam

water tank will be filled during the next drying cycle. Water will be supplied by the water

circuit directly to the steam water tank filling it automatically.

To activate recirculation set valve to the ON position. To do that:

1. Pull drawer containing condensed water

container out a little. Behind the drawer

there are two elements:

steam water inlet - for manual refill-

ing of steam water container.

water recirculation system valve/fil-

ter.

ProSteam system

max.

OFF