AEG L 60260 TL 사용자 설명서 - 페이지 20

{카테고리_이름} AEG L 60260 TL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG L 60260 TL 32 페이지.
AEG L 60260 TL에 대해서도 마찬가지입니다: 사용자 설명서 (28 페이지)

AEG L 60260 TL 사용자 설명서
20 www.aeg.com

TROUBLESHOOTING

The start of the appliance does not occur
or it stops during operation.
First try to find a solution to the problem
(refer to the table). If not, contact the serv-
ice centre.
With some problems, the acoustic
signals operate and the display shows
an alarm code:
- The appliance does not fill with
water.
Problem
The appliance
does not fill with
water.
The appliance
does not drain the
water.
The appliance
door is open or
not closed correct-
ly.
Possible cause
The water tap is closed.
The water inlet hose is
damaged.
The filters in the water in-
let hose is blocked .
The water tap is blocked
or is furred with lime-
scale.
The connection of the
water inlet hose is not
correct.
The water pressure is too
low.
The water drain hose is
damaged.
The filter of the drain
pump is blocked.
The connection of the
water drain hose is not
correct.
A washing programme
without the drain phase
is set.
The function Rinse &
Hold is on.
- The appliance does not drain
the water.
- The appliance door is open or
not closed correctly.
- The anti-flood device is on.
WARNING!
Deactivate the appliance before
you do the checks.
Possible solution
Open the water tap.
Make sure that the water inlet
hose has no damages.
Clean the filters. Refer to 'Care
and cleaning'.
Clean the water tap.
Make sure that the connection is
correct.
Contact your local water authori-
ty.
Make sure that the water drain
hose has no damages.
Clean the filter of the drain
pump. Refer to 'Care and clean-
ing'.
Make sure that the connection is
correct.
Set the drain programme.
Set the drain programme.
Close the door correctly.