Fujitsu LifeBook C-6651 소프트웨어 설명서 - 페이지 7

{카테고리_이름} Fujitsu LifeBook C-6651에 대한 소프트웨어 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu LifeBook C-6651 39 페이지. Bios setup utility
Fujitsu LifeBook C-6651에 대해서도 마찬가지입니다: 바이오스 매뉴얼 (37 페이지)

페이지 인쇄

1. Bios Setup Utility

Secondary Master Submenu of the Main Menu

The Secondary Master submenu is for the internal CD-

ROM drive. The drive type is displayed on this menu as

well as the Main menu. Your notebook auto-senses the

characteristics of the internal CD-ROM Drive installed.

Main

Secondary Master [TOSHIBA CD-ROM XM-7002B-(SM)]*

Type:

Multi-Sector Transfers:

LBA Mode Control:

PIO Transfer Mode:

DMA Transfer Mode:

Help

ESC

Exit

Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu

Menu Field

Options

Type:

Auto

None

CD-ROM

Hard Disk

Multi-Sector

Disabled

Transfers:

2 Sectors

4 Sectors

8 Sectors

16 Sectors

32 Sectors

64 Sectors

128 Sectors

LBA Mode

Enabled

Control:

Disabled

PhoenixBIOS Setup Utility

[Auto]

[Disabled]

[Fast PIO 4]

[Ultra DMA 2]

Select Item

-/Space

Select Menu

Enter

Figure 3 Secondary Master Submenu

Default

[Auto]

[Disabled]

M a i n M e n u

You will not need to modify these settings, they are

displayed for your reference.

*Actual drive labels shown may vary.

Item Specific Help

Select ATA/ATAPI drive

installed here.

[Auto]

The BIOS auto-types the

drive on boot time.

Except [Auto]

You enter parameters of

the drive.

[None]

The drive is disabled.

Change Values

Select

Sub-Menu

F10

Description

Selects the ATA/ATAPI device type. Select Auto to have the type

automatically identified by the BIOS at POST. If None is selected, all

of the following Set-up items do not appear. Select CD-ROM or

Hard Disk for appropriate drive type installed at this connection.

This option cannot be changed when Auto is selected. Specify the

number of sectors per block for multiple sector transfer.

Enables or disables Logical Block Addressing in place of Cylinder,

Head, Sector addressing. This option cannot be changed when

Auto is selected.

Setup Defaults

Save and Exit