Brother P-TOUCH CUBE 사용자 설명서 - 페이지 15

{카테고리_이름} Brother P-TOUCH CUBE에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother P-TOUCH CUBE 18 페이지. Tze tape
Brother P-TOUCH CUBE에 대해서도 마찬가지입니다: 사용자 설명서 (18 페이지), 사용자 설명서 (25 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (18 페이지)

페이지 인쇄
Brother P-TOUCH CUBE 사용자 설명서
4. Turning the Label Printer On or Off
Press the Power Button to power on. Hold the Power Button for 0.5 seconds to power off.

5. LED Indications

The label printer's LED indicates the label printer's status.
LED
Lighting a light to green
Flashing a light to green
Flashing a light to green
Lighting a light to red
Flashing a light to red
Flashing a light to red
Flashing a light to orange
Label printer is connected via Bluetooth or the tape is
feeding.
If a green light is on for 3 seconds, then off for 1 second,
the label printer is powered on and ready.
If a green light flashes on and off at 0.5 second
intervals, the unit is receiving data from your
smartphone or tablet.
The label printer is booting.
If a red light flashes on and off at 1 second intervals,
one of the following has occurred:
• No Tape Cassette installed
• Incorrect Tape Cassette installed
• Incompatible Tape Cassette installed
• Transmission error (see "7. Troubleshooting")
• Cutter error
• Incompatible AC Adapter used
(see "7. Troubleshooting")
If a red light flashes on and off at 0.5 second intervals,
there is a system error (see "7. Troubleshooting").
If an orange light flashes on and off at 1 second
intervals, the batteries are almost out of power.
Condition