Fujitsu LIFEBOOK E Series 쉬운 매뉴얼 - 페이지 30

{카테고리_이름} Fujitsu LIFEBOOK E Series에 대한 쉬운 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu LIFEBOOK E Series 41 페이지.
Fujitsu LIFEBOOK E Series에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지)

페이지 인쇄
Fujitsu LIFEBOOK E Series 쉬운 매뉴얼
Ports and operating elements

Brief overview of security functions

Securityfunctions
Briefoverviewofsecurityfunctions
Detailed information about the security equipment of your device can be found
in the "Professional Notebook" manual, on the "Drivers & Utilities" CD/DVD
or on our website at "http://ts.fujitsu.com/support".
Security functions
Kensington Lock
Fingerprint sensor
(device-dependent)
BIOS password protection
Boot from Removable Media
Owner Information
Virus Warning
System Lock 2
SmartCard reader
(device-dependent)
Trusted Platform Module
(device-dependent)
22
Type of protection
Mechanical
Biometric
Password protection for BIOS
Setup, operating system and
hard disk with supervisor and
user password. The passwords
consist of a maximum of eight
alphanumeric characters.
Prevents unauthorised booting
of an operating system from
external media (e.g. USB stick,
USB CD-ROM drive etc.)
Displays Help Desk or Owner
Information during the booting
process
This checks the boot sectors of
the hard disk drive to see if any
changes have been made since
the previous system start-up.
The BIOS can only be called up
with a SmartCard and PIN.
PIN and SmartCard protection
for operating system
Identification and authentication
of the notebook
Preparation
Fitting and locking the
Kensington MicroSaver
(accessory)
Installing the supplied
fingerprint software
Specify at least one supervisor
password in the BIOS Setup
and activate the password
protection for the operating
system and hard disk as
desired.
In the BIOS Setup go to the
Security menu and edit the
option Boot from Removable
Media.
In the BIOS Setup go to the
Security menu and edit the
option Owner Information.
In the BIOS Setup go to the
Security menu and edit the
option Virus Warning.
Assign a supervisor password
in the BIOS and initialise the
SmartCard.
Install the corresponding
software, e.g. SmartCase
Logon+ (accessory). Specify
a password when using the
SmartCase Logon+ software.
Defining a supervisor password
in the BIOS Setup and enabling
the TPM (Security Chip)
A26391-K272-Z220-1-7619, edition 1