Brother P-touch MW-145BT 빠른 참조 매뉴얼 - 페이지 11

{카테고리_이름} Brother P-touch MW-145BT에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother P-touch MW-145BT 17 페이지. Mobile printer
Brother P-touch MW-145BT에 대해서도 마찬가지입니다: 소프트웨어 사용 설명서 (25 페이지)

페이지 인쇄
Brother P-touch MW-145BT 빠른 참조 매뉴얼
Charging
Use the AC adapter designed specifically for this printer to charge the
battery.
After purchasing this printer, be sure to charge the battery fully before
using it.
1
Plug the AC adapter cable

into the printer.

2
Plug the AC adapter plug into
a household electrical outlet
(AC 110 V
Charging of the lithium ion battery
automatically begins.
→
The orange charging LED is lit.
→
When charging is finished, the charging LED
goes off.
3
After charging is finished, disconnect the AC adapter.
The MW-145BT cannot be operated solely with the AC adapter.
The rechargeable battery must be installed.
120 V).
-
It takes approximately three hours for the battery to be
recharged from completely empty to fully charged (with the
printer turned off).
Recharge the battery in an environment with a temperature
between 5 °C and 40 °C/41 °F and 104 °F. (The battery will not
recharge if the ambient temperature is outside of this range.)
10