Brother P-touch PRO DX PT-9200DX 빠른 참조 - 페이지 33

{카테고리_이름} Brother P-touch PRO DX PT-9200DX에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother P-touch PRO DX PT-9200DX 40 페이지. Brother label printer quick reference guide
Brother P-touch PRO DX PT-9200DX에 대해서도 마찬가지입니다: 부품 참조 목록 (16 페이지)

페이지 인쇄

Changing the P-touch's Baud Rate

The PT-9200DX's default baud rate for a serial connection is 115,200 bps. Some computers may not support a serial port

baud rate of 115,200 bps. If so, follow the procedure below to change the P-touch's baud rate to 9,600 bps. In addition, the

baud rate for the port must also be set to 9,600 bps.

1 Turn off the PT-9200DX.

2 Hold down the power button for about five seconds.

3 Release the power button when it begins flashing in red and green.

4 The baud rate of the PT-9200DX has been set to the slower baud rate of 9,600 bps.

Power button