Brother P-touch PRO DX PT-9200DX 빠른 참조 - 페이지 7

{카테고리_이름} Brother P-touch PRO DX PT-9200DX에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother P-touch PRO DX PT-9200DX 40 페이지. Brother label printer quick reference guide
Brother P-touch PRO DX PT-9200DX에 대해서도 마찬가지입니다: 부품 참조 목록 (16 페이지)

페이지 인쇄

When connecting to the USB port:

You must install the software first before connecting to the USB interface or turning on the power. Please follow the

installation procedures on pages 6 through 12 before connecting up or turning the power on. The Brother P-touch

installation software will instruct you when to do this.

1 Connect one end of the enclosed USB interface cable to the USB connector (

end of the cable to the USB port of the computer.

Do not connect the PT-9200DX to the computer using both the serial and the USB interface cables, otherwise

the PT-9200DX may be damaged.

When making a USB connection through a hub, a proper connection may not be possible due to the type of

hub used. If printing is not possible with a hub connection, try connecting the PT-9200DX directly to the

computer using the USB interface cable.

2 Insert the plug on one end of the power supply cord into the power supply jack on the PT-9200DX.

3 Insert the plug on the other end of the power supply cord into an AC outlet equipped with a grounding terminal.

Some locations may require the use of an adapter provided with a grounding wire. Connect this wire to the ground

terminal.

USB

) of the PT-9200DX and the other