AEG L 73283 FL 사용자 설명서 - 페이지 14
{카테고리_이름} AEG L 73283 FL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG L 73283 FL 24 페이지. Electrolux
AEG L 73283 FL에 대해서도 마찬가지입니다: 사용자 설명서 (28 페이지)
페이지 인쇄
14 www.aeg.com
• The indicator
stays on.
• The indicator
display.
• The programme starts, the door is
locked and the display shows the indi-
cator
• The drain pump can operate for a
short time when the appliance fills wa-
ter.
After approximately 15 minutes
from the start of the programme:
• The appliance adjusts auto-
• The display shows the new val-
9.6 Starting a programme with
delay start
• Press
play shows the delay you want to set.
The related indicator comes on the
display.
• Press
– The appliance starts the countdown.
– When the countdown is completed,
the programme starts automatically.
You can cancel or change the set
of the delay start before you
press
To cancel the delay start:
1.
Press
pause.
2.
Press
Press
gramme immediately.
9.7 Interrupting a programme
and changing the options
You can change only some options be-
fore they operate.
1.
Press
2.
Change the options.
3.
Press
continues.
stops to flash and
starts to flash on the
.
matically the programme dura-
tion agree with the laundry
load.
ue.
again and again until the dis-
:
.
to set the appliance to
until the display shows
again to start the pro-
. The indicator flashes.
again. The programme
9.8 Cancelling a programme
1.
Press the button
onds to cancel the programme and
to deactivate the appliance.
2.
Press the same button again to acti-
vate the appliance. Now, you can set
a new washing programme.
The appliance does not drain the
water.
9.9 Changing the options
You can change only some options be-
fore they operate.
1.
Press
. The related indicator
flashes.
2.
Change the options.
3.
Press
again. The programme
continues.
9.10 Opening the door
While a programme or the delay start
operates, the appliance door is locked
and the display shows the indicator
CAUTION!
If the temperature and level of
the water in the drum are too
high, you cannot open the door.
Open the appliance door when the
delay start operates:
1.
Press
to pause the appliance.
2.
Wait until the door lock indicator
goes off.
3.
Open the door.
4.
Close the door and press
'.
The delay start continues to operate.
Open the appliance door when the
programme operates:
1.
Press the button
onds to deactivate the appliance.
2.
Wait for some minutes and then
open carefully the appliance door.
3.
Close the appliance door.
4.
Set the programme again.
9.11 At the end of the
programme
• The appliance stops automatically.
for some sec-
.
again.
for some sec-