Fujitsu Lifebook N3520 바이오스 매뉴얼 - 페이지 13
{카테고리_이름} Fujitsu Lifebook N3520에 대한 바이오스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Lifebook N3520 21 페이지. Lifebook n series
페이지 인쇄
SECURITY MENU – SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security
features of your notebook to fit your operating needs
and to view the current security configuration. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating Through
The Setup Utility on page 2 for more information.)
The following tables show the names of the menu fields
for the Security menu and its submenus, all of the
options for each field, the default settings and a
description of the field's function and any special
information needed to help understand the field's use.
The default condition is no passwords required and no
write protection.
If you set a password, write it down and
keep it in a safe place. If you forget the
password you will have to contact your
support representative to regain access to
your secured functions and data.
Insyde Bios Setup Utility
Main
Advance
System
Primary Master : FUJITSU MHT2100AT
Secondary Master : MATSHITADVD-RAM UJ-831S
BIOS Version :
BIOS Date :
BIOS Area :
Supervisor Password Is :
User Password Is :
Primary Master Password Is :Clear
Owner
Information Is :
Asset Number :
Press <Enter> Key to set Supervisor Password to enable any Password Features.
Then Password Entry is required to enter BIOS Setup.
Security
Boot
Exit
Set Supervisor Password
Set User Password
Minimum User Password Length
_
Password on Boot
_
On Automatic Wake Up
x.xx
_
KB Lock on Resume
xx/xx/xx
Boot from Removable Media
E000h - FFFFh
Flash Write
Clear
Hard Disk Security
Clear
Owner Information
Clear
None
Figure 13. Security Menu
S e c u r i t y M e n u
■
Entering a password incorrectly 3 times
in a row will cause the keyboard and
mouse to be locked out and the warning
[System Disabled] to be displayed.
If this happens restart the computer by
turning off and on the power with the
power switch and use the correct pass-
word on reboot.
■
If you make an error when re-entering
the password a [Warning] will be dis-
played on the screen. To try again press
the Enter key and then retype the pass-
word. Press the Esc key to abort the
password setting process.
■
If the Power Management Security is
Enabled and the Password on Boot is
Disabled you will not have to type your
password upon resuming the system
from the Suspend or Save-to-Disk
modes. Power Management Security
will work only if Password boot is
enabled.
Oct 18, 2005
CPU
Intel(R) Pentium(R)
Speed:
1.73 GHz
1 Cache:
2 Cache:
2048 KB
Memory
Total :
512 MB
Slot 1 :
256 MB DDR2
Slot 2 :
256 MB DDR2
5:05:30 PM
M 740
64 KB
13