Brother P-touch PT-9700PC 사용자 설명서 - 페이지 35
{카테고리_이름} Brother P-touch PT-9700PC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother P-touch PT-9700PC 48 페이지. Desktop barcode and label printers
Brother P-touch PT-9700PC에 대해서도 마찬가지입니다: 기술 사양 (4 페이지), 매뉴얼 (8 페이지)
페이지 인쇄
Note
P-touch Editor Lite LAN is ideal for
●
creating simple labels. To create labels
with more complex designs, use
P-touch Editor 5.0.
When using P-touch Editor Lite LAN for
●
the first time, the "Add shortcut" dialog
box appears. Select the desired location
from "Start menu", "Desktop" or "Quick
Launch bar", then put a check mark in
the box, and click [OK]. You can access
P-touch Editor Lite LAN from the shortcut
next time.
Since P-touch Editor Lite LAN uses the
●
network printing method and not the
driver settings, high speed printing and
high resolution printing using HG tape
are not available.
Print jobs from the full version of P-touch
●
Editor sent from another computer may
interrupt your printing. P-touch Editor
Lite LAN will resume printing once the
print job from the full version has been
completed.
For more detailed information, see the
●
"Software User's Guide" (PDF).
34
Printing the printer settings
The printer settings page shows a report listing
the printer settings and the network settings
(PT-9800PCN only). You can print the printer
settings page using the Feed/Cut button of the
printer.
Note
In addition to other details, the node
●
name and Ethernet address are printed
in the printer settings list.
The default Node name of the network
●
card in the printer is
"BRNXXXXXXXXXXXXXXX" where
"XXXXXXXXXXXXXXX" is the Ethernet
address.
Make sure that the TZ or HG tape
1
cassette is installed and the tape
compartment cover is closed.
To print the printer settings page, we
recommend to use the tape wider than
24 mm.
Turn on the printer.
2
Press and hold the Feed/Cut button to
3
print out the settings.