Fujitsu LifeBook N6000 바이오스 매뉴얼 - 페이지 8

{카테고리_이름} Fujitsu LifeBook N6000에 대한 바이오스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu LifeBook N6000 27 페이지. Lifebook n series
Fujitsu LifeBook N6000에 대해서도 마찬가지입니다: 바이오스 매뉴얼 (28 페이지)

페이지 인쇄

L i f e B o o k N S e r i e s N o t e b o o k B I O S

Secondary Master Submenu of the Main Menu

The Secondary Master submenu allows you to configure secondary ATA devices.

Main

Secondary Master [TOSHIBA DVD-ROM SD-R2412]

Type:

Multi-Sector Transfers:

LBA Mode Control:

Transfer Mode:

Ultra DMA Mode:

Help

ESC

Exit

Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu

Menu Field

Options

■

Type:

Auto

■

None

■

CD-ROM

■

Hard Disk

CHS Format

■

Cylinders:

A number between

0 and 65,535

■

Heads:

A number between

1 and 16

■

Sectors:

A number between

0 and 63

PhoenixBIOS Setup Utility

[Auto]

[Disabled]

[Standard]

[Disabled]

Select Item

-/Space

Change Values

Select Menu

Enter

Select

Figure 3. Secondary Master Submenu

Default

Description

[Auto]

NOTE: The Type field does not appear as a drop-down menu. Tap

the spacebar to cycle through the selections.

Selects the ATA/ATAPI device type. Select Auto to have the type

automatically identified by the BIOS at POST. If None is selected, all

of the following Set-up items do not appear. Select CD-ROM,

SuperDisk or Hard Disk for appropriate drive type installed at

this connection.

Cylinders/Heads/Sectors

–—

This item appears only when Hard Disk is selected as the type. This

field is changed by incrementing (pressing the [Spacebar]) or by typ-

ing in the number.

–—

This item appears only when Hard Disk is selected as type. You can

change the value by incrementing (pressing the [Spacebar]) or by

typing in the number.

–—

This item appears only when Hard Disk is selected as type. You can

change the value by incrementing (pressing the [Spacebar]) or by

typing in the number.

Item Specific Help

Select ATA/ATAPI drive

installed here.

[Auto]

The BIOS auto-types the

drive on boot time.

Except [Auto]

You enter parameters of

the drive.

[None]

The drive is disabled.

Setup Defaults

Sub-Menu

F10

Save and Exit