Brother P-touch PT-9800PCN 사용자 설명서 - 페이지 15

{카테고리_이름} Brother P-touch PT-9800PCN에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother P-touch PT-9800PCN 48 페이지. Desktop barcode and label printers
Brother P-touch PT-9800PCN에 대해서도 마찬가지입니다: 기술 사양 (4 페이지), 매뉴얼 (8 페이지)

페이지 인쇄

Using the interface cables

Serial (RS-232C) cables and network (Ethernet) cables are not standard accessories. Use the

appropriate cable for your type of interface.

Note

For USB interface, the included USB interface cable should be used to ensure compliance

●

with the limits for EMC.

For serial and network interfaces, a shielded interface cable should be used to ensure

●

compliance with the limits for EMC.

Changes or modifications not expressly approved by Brother Industries, Ltd. may affect the

●

performance and print quality, and damage may not be covered under the limited warranty.

■ USB cable

Use the enclosed interface cable.

■ Serial (RS-232C) cable (Windows

The pin assignments for the serial cables (RS-232C cables) which can be used with this printer

are shown in the table below. You can purchase the cables at an electronics store. Do not use

a serial cable that is longer than 1.8 m.

Brother printer side

(D-Sub female, lock screw #4-40 inch screw)

Signal

Name

DCD

RXD

TXD

DTR

GND

DSR

RTS

CTS

Note

The RS-232C serial connector part of this equipment is not Limited Power Source.

●

For details on serial interface settings, refer to "Serial interface settings (Windows

●

(→ P. 35).

■ Network cable (PT-9800PCN only)

Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX

Fast Ethernet Network.

Note

Connect this product to a LAN connection that is not subjected to overvoltages.

●

Pin Assignments

Number

only)

Computer side

(D-Sub9P female)

Signal

Number

Name

DCD

RXD

TXD

DTR

GND

DSR

RTS

CTS

only)"