Fujitsu LifeBook P5010 바이오스 매뉴얼 - 페이지 8
{카테고리_이름} Fujitsu LifeBook P5010에 대한 바이오스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu LifeBook P5010 26 페이지. Lifebook p series
Fujitsu LifeBook P5010에 대해서도 마찬가지입니다: 사양 (2 페이지)
페이지 인쇄L i f e B o o k P 5 0 0 0 N o t e b o o k B I O S
Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu
Menu Field
Options
Sectors:
• A number
between 0
and 63
Maximum
• Display only
Capacity:
Multi-Sector
• Disabled
Transfers:
• 2 Sectors
• 4 Sectors
• 8 Sectors
• 16 Sectors
LBA Mode
• Disabled
Control:
• Enabled
Transfer
• Standard
Mode:
• Fast PIO 1
• Fast PIO 2
• Fast PIO 3
• Fast PIO 4
• Multiword
DMA 1
• Multiword
DMA 2
Ultra DMA
• Disabled
Mode:
• Mode 1
• Mode 2
• Mode 3
• Mode 4
• Mode 5
Exiting from Main Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [
If you wish to move to another menu, use the cursor keys.
8
Default
Description
–—
This item appears only when the type is identified as Auto or Hard
Disk. When Hard Disk is selected, you can change the value. This
field is changed by incrementing (pressing the [Spacebar]) or by typ-
ing in the number.
–—
Displays the maximum capacity of the drive calculated from the
parameters of the hard disk when Hard Disk is selected.
[Disabled]
This option cannot be changed when Auto is selected. Specify the
number of sectors per block for multiple sector transfer.
[Disabled]
Enables or disables logical Block Addressing in place of Cylinder,
Head, Sector addressing. This option cannot be changed when Auto
is selected.
[Standard]
Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode. This option cannot be
changed when Auto is selected. Multi-word DMA is automatically
set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set to
mode 2 for Fast PIO 4 / DMA.
[Disabled]
Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode. This option cannot be
changed when Auto is selected.
] key or use the cursor keys to go to the Exit menu.
Esc