AEG L 75483 FL 사용자 설명서 - 페이지 10

{카테고리_이름} AEG L 75483 FL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG L 75483 FL 32 페이지.

10
TIME SAVE BUTTON
Press the button
programme duration.
• Press one time to set 'Shortened du-
ration' for items with daily soil.
• Press two times to set 'Extra Quick'
for items with almost no soil.
Some programmes accept only
one of the two functions.
EXTRA RINSE BUTTON
Press button
to a programme.
Use this function for persons allergic to
detergents and in areas where the wa-
ter is soft.
STAIN BUTTON
Press button
to a programme.
Use this function for laundry with hard
stains to remove.
When you set this function, put the
stain remover into compartment
This function increases the pro-
gramme duration.
This function is not available
with a temperature lower than
40° C.
SPIN BUTTON
Press this button to:
• Decrease the maximum speed of the
spin phase when you set a pro-
gramme.
The display shows only the spin
speeds available with the set
programme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function.
Set this function to prevent fabric
creases. The appliance does not
drain the water when the programme
is completed.
6
6
to decrease the
7
7
to add rinsing phases
8
8
to add the stain phase
9
TEMPERATURE BUTTON
Press button
temperature.
- -
= cold water
ACOUSTIC SIGNALS
FUNCTION
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press button
at the same time for 6 seconds.
If you deactivate the acoustic
.
signals, they continue operate
only when you press the buttons
and when a malfunction occurs.
CHILD LOCK FUNCTION
This function prevents children to play
with the control panel.
• To activate the function, press button
10
and button
until the display shows the symbol
.
• To deactivate the function, press but-
ton
and button
10
time until the symbol
You can activate the function:
• Before you press the Start/Pause but-
ton
: the appliance cannot start.
4
• After you press the Start/Pause but-
ton
4
, all the buttons and the pro-
gramme knob are deactivated.
Spin phase is off.
'Rinse Hold' function is
on.
10
to change the default
8
and button
9
at the same time
at the same
9
goes off.
10
7