Brother P-Touch QL-500 사용자 설명서 - 페이지 14
{카테고리_이름} Brother P-Touch QL-500에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother P-Touch QL-500 19 페이지. Quick setup guide - spanish
Brother P-Touch QL-500에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 브로셔 (6 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 소프트웨어 설치 매뉴얼 (15 페이지), 빠른 시작 매뉴얼 (2 페이지), (영어) 빠른 가이드 (2 페이지)
페이지 인쇄
12
Maintenance and Troubleshooting
4
Insert edge (A) of the cleaning sheet into the printing unit and guide
it out to just in front of the cutter.
•
Do not remove part (A) of the cleaning sheet.
•
The printed side of the cleaning sheet should be facing upwards.
5
After inserting the cleaning sheet into the
printing unit, push down the roll release lever
and remove the B part of cleaning sheet.
To purchase a cleaning sheet, contact the retail
outlet where the printer was purchased or your local
authorized service centre.
6
Close the DK Roll cover and turn ON the printer's power.
7
Press the Feed button for more than one
second.
The roller rotates for 100 mm.
The adhesive face of the cleaning sheet removes any
stains or dust on the roller.
•
If you do not press the Feed button for more than
one second, the roller rotates for only 8 mm.
•
Dispose the cleaning sheet after use.
Label outlet maintenance
When glue is attached to the label
outlet (metallic plate part and resin
guide part) and the printer damages
the label, pull out the power plug from
the socket and clean the label outlet
with a cloth dipped into ethanol or
isopropyl alcohol.
It is recommended to clean the label
outlet when replacing the cutter unit.
Feed button
Label outlet