Fujitsu Lifebook P701 바이오스 매뉴얼 - 페이지 25

{카테고리_이름} Fujitsu Lifebook P701에 대한 바이오스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Lifebook P701 27 페이지. Lifebook p series
Fujitsu Lifebook P701에 대해서도 마찬가지입니다: 데이터시트 (2 페이지), 시작하기 (12 페이지)

페이지 인쇄

BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE

The Boot Menu is used to select the order in which the

BIOS searches sources for the operating system. Follow

the instructions for Navigating Through the Setup

Utility to make any changes. (See Navigating through

the Setup Utility on page 2 for more information.)

Be careful of the operating environment when booting from a CD or you may overwrite files by mistake.



A bootable CD-ROM has either a floppy disk format or a hard drive format. When the CD-ROM is used,



drive allocations change automatically without changing the BIOS setup. If a floppy disk format is used,

the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if the internal

hard drive is not present or disabled. The bootable CD-ROM can never use a C: designation if a formatted

internal hard drive is present since the C: designator is always reserved for the hard drive.The boot

sequence ignores the new drive designations, but your application software will use the new designations.

Info

Boot Priority Order:

Floppy Disk Drive

Drive0 HDD: Hitachi ST9320325AS

Drive5 HDD:

NETWORK: IBA GE Slot 00C8 v1363

USB HDD:

USB CD/DVD:

Help

ESC

Exit

Table 18: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu

Menu Field

Boot priority order:

1: Floppy Disk Drive

2: Drive0:

3: Drive5 HDD:

4: NETWORK:

5: USB HDD:

6: USB CD/DVD:

Exiting from Boot Menu

When you have finished setting the boot parameters with the Boot Menu, you can either exit from the setup utility or

move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit Menu. If you wish

to move to another menu, use the cursor keys.

Phoenix SecureCore(tm) Tiano Setup

System

Advanced

Security

Select Item

Select Menu

Figure 18. Boot Device Priority Submenu

Description

The boot selections determine the order in which the BIOS searches for the operating system during the

startup sequence. To change the order, highlight one source by using the [up] or [down] cursor keys and

then press the [+] or [-] key to change the order number. Tapping [x] removes from the list a device that is

not installed. Tapping [x] on an item in the Excluded list adds the device to the Boot priority list. Be sure to

save your changed order when you exit the BIOS setup utility by either going to the Exit Menu and

choosing Exit Saving Changes, or pressing F10 and choosing Yes to Save and Exit.

NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be

overwritten, depending upon your operating environment.

The following table shows devices associated with your

notebook and the order in which they will be searched

for the boot device.

Boot

Exit

Change Values

-/Space

Select

Sub-Menu

Enter



B o o t M e n u

Item Specific Help

Configures order of

Boot Device.

Keys used to view or

configure devices.

'' and '': Select a

device:

'+' and '-': Move the

device up or down.

'Shift + 1': Enables or

disables(!) a device.

Setup Defaults

F10

Save and Exit