Fujitsu Lifebook P701 시작하기 - 페이지 3

{카테고리_이름} Fujitsu Lifebook P701에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Lifebook P701 12 페이지. Lifebook p series
Fujitsu Lifebook P701에 대해서도 마찬가지입니다: 데이터시트 (2 페이지), 바이오스 매뉴얼 (27 페이지)

페이지 인쇄

Initial Start Up

opening the

Display

Connecting the AC Adaptor

DC Power Jack

Connecting the LAN

LAN Port

Wireless Device on/off Switch

1. open the Display Panel

• Ensure that your LIFEBOOK is on a hard level surface and that the air vents

• Lift the display, being careful not to touch the screen.

• Adjust the display until it is at a comfortable viewing angle.

2. Connect AC Power

• Plug the power cord into the AC adapter.

• Plug the AC adapter into your notebook.

• Connect the power cord to an electrical outlet.

3. turn on Power

• Press the Power/Suspend/Resume switch.

• The notebook is now on and the battery is being charged.

• The notebook will begin a power-on self test. Once successfully

4. Starting Windows

AC Adapter

• Accept the Microsoft

Power Plug

AC Cable

5. Activate Additional Utilities,

Applications, & Drivers

• Move the WLAN switch to the on position (to configure WLAN and Bluetooth)

Ensure that the AC adapter is connected and supplying power to your

notebook before activating Click Me! It will take 25 to 30 minutes for

Click Me! to install and configure your drivers and utilities.

• In addition to an icon on the desktop, a dialog box

6. Connect to the Internet or Network

• Ensure the wireless switch is "On" to turn on the wireless device, or—

• Connect an Ethernet cable (not supplied) to the LAN jack on your

• Register your LIFEBOOK with Fujitsu Service and Support via our website

Power/Suspend/

7. Create backup media with myRecovery

Resume Button

(Hard drive HDD recovery models only)

• Click on the [MyRecovery] icon to create backup recovery media and

• Look in the "Saving and Recovering Your Factory and System Images"

are not blocked.

completed, the operating system will the initialization process.

The lithium ion battery is not charged upon purchase. Initially you will

need to connect either the AC adapter or Auto/Airline adapter to use

your notebook.

for the First time

When configuring Windows

Otherwise, there may be issues when activating Click Me!.

Windows

User License Agreement to proceed. Select your User ID and Password

during the "Welcome Screen." Keep a record of your User ID and password

stored in a secure place. THE SCREEN WILL GO DARK FOR SEVERAL

MINUTES. Do not attempt to turn power on or off during this stage.

Check to be sure that your LIFEBOOK is NOT connected to a

network or the Internet.

and check to be sure your LIFEBOOK is NOT connected to the network or

the Internet.

will automatically open that prompts you to run

Click Me!. If you choose not to run Click Me! at this

time, the Click Me! icon will appear on your desktop.

When you click the Click Me! icon, your system will

automatically build the icon tray in the bottom right

of the screen. These icons provide links to utilities

that you will frequently access.

notebook and to a wall jack or to Ethernet router.

(us.fujitsu.com/computers). This helps us to better serve you.

application discs.

guide for more detailed instructions.

Recovery discs (for your pre-loaded factory image) are NOT included

with LIFEBOOKS that are shipped with MyRecovery. If your hard

drive crashes or the computer system becomes corrupted, you

can use the recovery discs that you create to restore the system

to its original condition.

7, skip the step to setup the WLAN.

Licensing Agreement and the Fujitsu End

(For

Additional

Applications

and Utilities)

"Click me!"