Brother P-touch QL-710W 네트워크 사용 설명서 - 페이지 39

{카테고리_이름} Brother P-touch QL-710W에 대한 네트워크 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother P-touch QL-710W 48 페이지. Label printer
Brother P-touch QL-710W에 대해서도 마찬가지입니다: 소프트웨어 사용 설명서 (48 페이지), 사용자 설명서 (23 페이지), 사용자 설명서 (23 페이지), 빠른 설정 매뉴얼 (38 페이지)

페이지 인쇄

1. Changing Your Printer's Network Settings (Ip Address, Subnet Mask and Gateway)

Appendix C

Changing the Communication Settings

Make sure that the computer with the Network Setting Tool installed is connected via USB to the printer

that you want to configure.

Start the Network Setting Tool. Confirm that the printer that you want to configure is displayed in Printer.

If another printer is displayed, select the desired printer from the Printer drop-down list box.

Note

If only one printer is connected, only that printer is displayed and it is not necessary to select a printer.

From Network Settings of Applicable Settings, click the items that will be changed.

For QL-720NW



From the pull-down list, select Wired, Wireless or Wired/Wireless.

The categories under Applicable Settings change according to the selected setting.

The selected settings that are displayed can be applied to the printer, saved or exported.

In the settings display/change area, select the desired setting from the pull-down list, or enter a value.

When you have changed all the desired settings, click the Apply button and then the Exit button.

The settings are applied to the printer.