Brother P-touch QL-710W 사용자 설명서 - 페이지 20

{카테고리_이름} Brother P-touch QL-710W에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother P-touch QL-710W 23 페이지. Label printer
Brother P-touch QL-710W에 대해서도 마찬가지입니다: 네트워크 사용 설명서 (48 페이지), 소프트웨어 사용 설명서 (48 페이지), 사용자 설명서 (23 페이지), 빠른 설정 매뉴얼 (38 페이지)

페이지 인쇄

Problem

The printed bar code cannot be

read.

I want to reset the printer/delete

the data transferred from the

PC/Mac.

I want to cancel the current

printing job.

• Set the label vertical to the print head as shown below.

Label exit slot

Print head

• Some types of scanner are not able to read the bar code. Try

using another scanner.

• We recommend printing the Bar code with Print Quality options

set to "Give priority to print quality".

Windows

XP:

To change the Print Quality options, open the printer properties

by going to [Control Panel] - [Printers and Other Hardware] -

[Printers and Faxes], right click the printer you want to change the

settings of, then select [Properties]. Then, in the [General] tab,

click [Printing Preferences...].

Windows Vista

To change the Print Quality options, open the printer properties

by going to [Control Panel] - [Hardware and Sound] - [Printers],

right click the printer you want to change the settings of, then

select [Properties]. Then, in the [General] tab, click [Printing

Preferences...].

Windows

To change the Print Quality options, open the printer properties

by going to

- [Devices and Printers], right click the printer you

want to change the settings of, then select [Printer properties].

Then, in the [General] tab, click [Preferences...].

Mac OS X 10.5.8 - 10.7:

To change the Print Quality options, use the "Basic" tab in the

printer properties.

Press and hold the Cut button while holding down the ON/OFF

button when the machine is turned off. When the Wi-Fi lamp

starts flashing and the Status lamp lights orange, press the Cut

button six times while continuing to hold down the ON/OFF

button. The machine will then reset. All data transferred from the

PC/Mac will be deleted and the machine will be reset to factory

settings.

• Make sure that the printer is ON, and press the ON/OFF button.

Solution

Recommended

print direction