Brother P-touch QL-710W 빠른 설정 매뉴얼 - 페이지 31

{카테고리_이름} Brother P-touch QL-710W에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother P-touch QL-710W 38 페이지. Label printer
Brother P-touch QL-710W에 대해서도 마찬가지입니다: 네트워크 사용 설명서 (48 페이지), 소프트웨어 사용 설명서 (48 페이지), 사용자 설명서 (23 페이지), 사용자 설명서 (23 페이지)

페이지 인쇄

6-1

Enter the Network Key you

noted in MEMO

and then click [Next].

If your network is not configured

for authentication and

encryption, the ATTENTION!

screen will appear. To continue

configuration, click [OK] and go

7-1

Confirm the wireless network

settings and then click [Next].

The settings will be sent to

your printer.

• The settings will remain

unchanged if you click

[Cancel].

• If you want to manually assign

an IP address to the printer,

click [Change IP Address]

and enter an IP address that is

compatible with your network.

• If the wireless setup failure

screen appears, click [Retry].

8-1

Disconnect the USB cable

connecting the computer and

the printer and then click

[Finish].

Wireless setup is now complete.

Go on to 9 to install the printer

driver and the software.

page 21

For Method 2 users

4-2

Confirm that your WLAN

access point/router has the

WPS symbol.

5-2

Place your printer within range

of your WPS access point/

router. The range may differ

depending on your

environment. Refer to the

instructions provided with your

access point/router.

6-2

Turn on your printer and press

and hold the Wi-Fi button until

the

(Wi-Fi) indicator

starts blinking in green.

7-2

Press the WPS button on

your WLAN access point/

router. When the configuration

is completed, the

(Wi-Fi) indicator on

your printer lights in green.

Wireless setup is now

complete. Go on to 9 to install

the printer driver and the

software.