Brother P-touch QL-710W 빠른 설정 매뉴얼 - 페이지 35
{카테고리_이름} Brother P-touch QL-710W에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother P-touch QL-710W 38 페이지. Label printer
Brother P-touch QL-710W에 대해서도 마찬가지입니다: 네트워크 사용 설명서 (48 페이지), 소프트웨어 사용 설명서 (48 페이지), 사용자 설명서 (23 페이지), 사용자 설명서 (23 페이지)
페이지 인쇄
P-touch Editor Lite LAN (Windows
Installing P-touch Editor
Lite LAN
P-touch Editor Lite LAN is a basic version
of a label-editing tool.
• In order for P-touch Editor Lite LAN to
be used, the IP address of this printer
must be correctly specified.
The IP address can be specified
with a utility such as BRAdmin Light,
which can be installed from
[Network Utility] on the CD-ROM.
For details on using this utility,
refer to "Setting the IP address and
subnet mask" in the "Network User's
Guide" (PDF).
• On a network where the IP address is
automatically assigned, (for example
with DHCP), the IP address is
automatically assigned when the
printer is connected to the network,
therefore the printer can be used
immediately. However, since the IP
address may change dynamically, we
recommend specifying a static IP
address when P-touch Editor Lite
LAN is being used. For details,
contact your network administrator.
• Specify the settings after consulting
with your network administrator.
1
Start the computer and put the
CD-ROM into the CD-ROM
drive.
If it does not start up
automatically, open the files on
the CD-ROM and double click
on "Start.exe".
2
Click [Custom Installation].
3
Click [P-touch Editor
Lite LAN].
4
Follow the on-screen
instructions.
The PteLiteLAN folder is created.
This completes the installation.
See the Software User's Guide
(PDF) for information on using
P-touch Editor Lite LAN.
®
)
33