Fujitsu Lifebook P7230 바이오스 매뉴얼 - 페이지 7
{카테고리_이름} Fujitsu Lifebook P7230에 대한 바이오스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Lifebook P7230 30 페이지. Lifebook p series
Fujitsu Lifebook P7230에 대해서도 마찬가지입니다: 쉬운 매뉴얼 (37 페이지)
페이지 인쇄
Table 2: Fields, Options and Defaults for the Drive0 Submenu of the Main Menu
Menu Field
Options
■
LBA Mode
Disabled
Control:
■
Enabled
■
Transfer
Standard
Mode:
■
Fast PIO 1
■
Fast PIO 2
■
Fast PIO 3
■
Fast PIO 4
■
Multiword DMA 1
■
Multiword DMA 2
■
Ultra DMA
Disabled
Mode:
■
Mode 0
■
Mode 1
■
Mode 2
■
Mode 3
■
Mode 4
■
Mode 5
■
A bootable CD-ROM or DVD-ROM may have a floppy disk or hard drive format. When a bootable CD-ROM or
DVD-ROM is used, drive allocations change automatically without changing the BIOS setup. If a floppy disk for-
mat CD-ROM or DVD-ROM is used, the disc becomes Drive A. The CD-ROM or DVD-ROM will only take drive
C: (hard drive format) if the internal hard drive is not present or is disabled. The bootable CD-ROM or DVD-ROM
can never use a C: designation if a formatted internal hard drive is present since the C: designator is always
reserved for the internal hard drive. The boot sequence ignores the new drive designations, however, your appli-
cation software will use the new designations.
■
Be careful of the operating environment when booting from CD-ROM/DVD-ROM or you may mistakenly over-
write files.
Default
Description
[Enabled]
Enables or disables logical Block Addressing in place of Cylinder, Head, Sector
addressing. This setting is automatically selected when [Auto] is selected as
the Type.
[Multiword
Selects the method for moving data to/from the drive. This option cannot be
DMA 2]
changed when Auto is selected and autotypes the drive to select the optimum
transfer mode.
[Disabled]
Selects the method for moving data to/from the drive. This setting is auto-
matically selected when [Auto] is selected and autotypes the drive to select
the optimum transfer mode.
M a i n M e n u
7