Fujitsu Lifebook P770 시작하기 매뉴얼 - 페이지 3
{카테고리_이름} Fujitsu Lifebook P770에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Lifebook P770 9 페이지. Port replicator
Fujitsu Lifebook P770에 대해서도 마찬가지입니다: 바이오스 매뉴얼 (29 페이지), 사용자 설명서 (8 페이지)
페이지 인쇄
Initial Start Up
DC Power Jack
Power Plug
Wireless LAN Bluetooth Switch
DC output
Cable
AC Adapter
AC Cable
Connecting the LAN
LAN Jack
Power/Suspend/
Resume Button
1. open the Display Panel
• Ensure that your LifeBook is on a hard level surface and that the air vents
are not blocked.
• Lift the display, being careful not to touch the screen.
• Adjust the display until it is at a comfortable viewing angle.
2. Connect AC Power
• Plug the power cord into the AC adapter.
• Plug the AC adapter into your notebook.
• Connect the power cord to an electrical outlet.
3. Connect to Internet or Network
• Connect an Ethernet cable (not included) to the LAN jack on your notebook
and to a wall jack or to an Ethernet router.
Important:
During the setup procedure, do not disconnect the power supply,
press any buttons, or use any peripheral devices such as a
remote control.
• You should not attach any external devices and do not put a DVD/CD in
your drive until you have gone through the initial power on sequence.
4. Booting the System
Important:
• During the setup procedure, do not disconnect the power supply, press any
buttons, or use any peripheral devices such as a mouse, keyboard,
or remote control.
• You should not attach any external devices and do not put a DVD/CD in
your drive until you have gone through the initial power on sequence.
The Lithium ion battery is not charged upon purchase.
Initially you will need to connect either the AC adapter
or the Auto/Airline adapter to use your notebook.
• Press the Suspend/Resume/Power button (above the keyboard) to turn on
the notebook. When you do this for the first time, it will display a Fujitsu
logo on the screen. If you do nothing the system will load the operating
system, and then the Windows Welcome will begin.
5. Register
• Accept the Microsoft
Windows100% Licensing Agreement and the Fujitsu
®
End User License Agreement to proceed.
• Select your User ID and Password during the "Welcome Screen."
• Keep a record of your User ID and password stored in a secure place.
• THE SCREEN WILL GO DARK FOR APPROXIMATELY TWO MINUTES.
• DO NOT ATTEMPT TO TURN POWER ON OR OFF DURING THIS STAGE.
6. Registering Your LifeBook notebook
• Register your notebook with Fujitsu Service and Support via our website
at us.fujitsu.com/computers.
• You will need to be set up with an Internet Service Provider (ISP)
to register online.
7. Installing Click me!
It is critical that you run Click Me! to
install necessary applications,
utilities and drivers.
• To verify a successful installation, the application icons will appear on the
desktop. This process can take up to 15-20 minutes.
• Check to be sure the WLAN switch is on or that your LifeBook is otherwise
connected to the Internet.
• After the first boot, a dialog box will automatically open that prompts you
to run Click Me!. If you choose not run Click Me! at this time, the Click Me!
icon will remain on your desktop.
• When you click the Click Me! icon, your system will automatically build the
icon tray in the bottom right of the screen. Other utilities (e.g. Bluetooth)
and drivers may be installed. Icons will be created that provide links to
application/utilities that you will frequently access. Once Click Me! is
completed the system will reboot.
8. Install Additional Software if needed
• Close any open programs, applications, or utilities. Insert software
application disc into media drive.
• Open the application folder, select the set-up icon, and load
desired software.
• Restart your computer.
(For
Additional
Utilities)
"Click me!"
3