AEG L 77685 WD 사용자 설명서 - 페이지 10

{카테고리_이름} AEG L 77685 WD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG L 77685 WD 40 페이지.
AEG L 77685 WD에 대해서도 마찬가지입니다: 사용자 설명서 (36 페이지)

AEG L 77685 WD 사용자 설명서
10 www.aeg.com
5.4 Start/Pause button
Press button
programme.

5.5 Delay start button

Press button
programme from 30 minutes to 20 hours.
5.6 Time save button
Press the button
programme duration.
• Press one time to set 'Shortened dura-
tion' for items with daily soil.
• Press two times to set 'Extra Quick' for
items with almost no soil.
Some programmes accept only
one of the two functions.

5.7 Drying time button

Press this button to set the time that
suits the fabrics you have to dry. The dis-
play shows the set value.
Each time you press this button the time
value increases by 5 minutes.
You cannot set all time values for
different types of fabrics.
5.8 Drying level button 8
Press this button to set an automatic lev-
el of dryness for the laundry. The display
shows the symbol of the set level.
• Extra dry
• Cupboard dry
• Iron dry
You can not set all automatic lev-
els for each type of fabrics.

5.9 Permanent extra rinse

function
With this function you can keep the extra
rinse function permanently on when you
set a new programme.
• To activate the function press button
and button
6
until the display shows the symbol
4
4
to start or interrupt a
5
5
to delay the start of a
6
to decrease the
6
7
at the same time
5
• To deactivate the function press but-
ton
6
and button
time until the symbol
5.10 Spin button
Press this button to:
• Decrease the maximum speed of the
spin phase when you set a pro-
gramme.
The display shows only the spin
speeds available with the set
programme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the wa-
ter when the programme is comple-
ted.
Spin phase is off.
'Rinse Hold' function is
on.
5.11 Temperature button
Press button
10
temperature.
- -
= cold water
5.12 Acoustic signals function
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, press button
the same time for 6 seconds.
If you deactivate the acoustic sig-
nals, they continue operate only
when you press the buttons and
when a malfunction occurs.
5.13 Child lock function
This function prevents children to play
.
with the control panel.
5
at the same
goes off.
9
10
to change the default
and button
8
7
at