Fujitsu LifeBook S752 바이오스 매뉴얼 - 페이지 32
{카테고리_이름} Fujitsu LifeBook S752에 대한 바이오스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu LifeBook S752 36 페이지. Lifebook e/p/s/u series
Fujitsu LifeBook S752에 대해서도 마찬가지입니다: 시작하기 (6 페이지), 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
- 1. Fujitsu Lifebook
- 2. Bios Setup Utility
- 3. Info Menu - Displays Basic System Information
- 4. System Menu - Setting Standard System Parameters
- 5. Advanced Menu - Setting Device Feature Controls
- 6. Parallel Port
- 7. USB Features
- 8. Security Menu - Setting the Security Features
- 9. Exiting from the Security Menu
- 10. Security Features
- 11. Boot Menu - Selecting the Operating System Source
- 12. Exit Menu - Leaving the Setup Utility
L I F E B O O K E / P / S / U B I O S G u i d e
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the
BIOS searches sources for the operating system. (See
Navigating through the Setup Utility on page 2 for more
information.)
Be careful of the operating environment when booting from a CD or you may overwrite files by mistake.
A bootable CD-ROM has either a floppy disk format or a hard drive format. When the CD-ROM is used, drive
allocations change automatically without changing the BIOS setup. If a floppy disk format is used, the CD-
ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if the internal hard drive is not
present or disabled. The bootable CD-ROM can never use a C: designation if a formatted internal hard drive is
present since the C: designator is always reserved for the hard drive.The boot sequence ignores the new drive
designations, but your application software will use the new designations.
Info
Boot Priority Order:
1:
Windows Boot Manager
2.
Floppy Disk Drive
3:
Drive0 HDD:
4:
Drive2 HDD:
5:
Drive4 HDD:
6:
Drive5 HDD:
7:
CD/DVD Drive:
8.
NETWORK:
9:
USB HDD:
10: USB CD/DVD:
F1
ESC
Table 18: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu
Menu Field
Boot Priority Order:
1: Windows Boot Manager
2. Floppy Disk Drive
3: Drive0:
4: Drive2:
5: Drive4:
6: Drive5:
7. CD/DVD:
8. NETWORK
9. USB HDD:
10:USB CD/DVD:
32
Phoenix SecureCore(tm) Tiano Setup
System
Advanced
Security
Help
Select Item
/
Exit
Select Menu
/
Figure 18. Boot Device Priority Submenu
Model
Description
All*
The boot selections determine the order that the BIOS searches for the operating sys-
tem during the startup sequence. To change the order, highlight one source by using
the [up] or [down] cursor keys and then press the [+] or [-] key to change the order
number. Tapping [x] removes from the list a device that is not installed. Tapping [x]
on an item in the Excluded list adds the device to the Boot priority list. Be sure to save
the changed order when you exit the BIOS utility by either going to the Exit Menu and
choosing Exit Saving Changes, or pressing F10 and choosing Yes to Save and Exit.
NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files
may be overwritten, depending upon your operating environment.
The following table shows devices associated with
your tablet and the order in which they will be
searched for the boot device
Boot
Exit
-/Space
Change Values
Enter
Select ► Sub-Menu
.
Item Specific Help
Configures order of
Boot Device.
Keys used to view or
configure devices.
'' and '': Select a
device:
'+' and '-': Move the
device up or down.
'Shift + 1': Enables or
disables(!) a device.
'Delete': Delete (x)
Windows Boot Manager
before the next boot
F9
Setup Defaults
F10
Save and Exit