AEG L 85275 XFL 사용자 설명서 - 페이지 31
{카테고리_이름} AEG L 85275 XFL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG L 85275 XFL 36 페이지.
AEG L 85275 XFL에 대해서도 마찬가지입니다: 사용자 설명서 (40 페이지)
페이지 인쇄
13.4 The inlet hose
Do not use an extension hose if
Do not use an extension hose if
Do not use an extension hose if
the inlet hose is too short. Con-
the inlet hose is too short. Con-
the inlet hose is too short. Con-
tact the service centre for the re-
tact the service centre for the re-
tact the service centre for the re-
placement of the inlet hose.
placement of the inlet hose.
placement of the inlet hose.
Water pressure
The appliance works correctly if the wa-
ter pressure is not less than 0.05 MPa
(0.5 bar).
O
O
45
45
O
O
20
20
• Connect the hose to the appliance.
Turn the inlet hose only left or right.
Loose the ring nut to set it in the cor-
rect position.
• Connect the water inlet hose to the
• Connect the water inlet hose to the
• Connect the water inlet hose to the
cold water tap with 3/4 thread.
cold water tap with 3/4 thread.
cold water tap with 3/4 thread.
CAUTION!
CAUTION!
CAUTION!
Make sure that there are no leaks
Make sure that there are no leaks
Make sure that there are no leaks
from the couplings.
If you can not connect the water inlet
hose to the cold water tap of the primary
hydraulic system, connect it to your do-
mestic cold water storage system.
Make sure not to have more than a dis-
tance of 5.02 m (16.5 ft) between the ap-
pliance inlet hose and the bottom of the
water storage tank.
ENGLISH
31