AEG L 87490 FL 사용자 설명서 - 페이지 10

{카테고리_이름} AEG L 87490 FL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG L 87490 FL 36 페이지. Washing machines
AEG L 87490 FL에 대해서도 마찬가지입니다: 사용자 설명서 (28 페이지)

10 www.aeg.com
If you make a wrong selection the message Err indicates that the selec-
tion is not possible.
J
K
L
5.4 Start/Pause button
Press button
programme.

5.5 Delay start button

Press button
programme from 30 minutes to 20 hours.
5.6 Time save button
Press button 6 to decrease the duration
of the programme.
– Press one time to set 'Shortened dura-
tion' for items with daily soil.
– Press two times to set 'Extra Quick' for
items with light soil.
Some programmes accept only
one of the two functions.
5.7 Extra rinse button
Press button
a programme.
The time save symbol comes on when you set one of the
programme duration:
• Shortened duration
• Extra Quick
The extra rinse symbol comes on when this function is acti-
vated.
The value shows the total number of the rinses.
The indicator bar is fully filled when you set to the maxi-
mum number of rinses.
The Stain symbol comes on when you activate the function.
The Prewash symbol comes on when you activate the func-
tion.
The indicator bar is not fully filled when you set only one of
the functions.
The indicator bar is fully filled when you set the two func-
tions.
4
to start or interrupt a
4
5
to delay the start of a
5
6
7
7
to add rinsing phases to
Use this function for persons allergic to
detergents and in areas where the water
is soft.
5.8 The Stain-Prewash button
8
Press button
8
to add the stain and/or
a prewash phase to a programme.
Press the button again and again to acti-
vate one or two options. The related
symbol and the indicator bar comes on
in the display.
STAIN
• Use this function for laundry with hard
stains to remove.
When you set this function, put the
stain remover into compartment
This function increases the pro-
gramme duration.
This function is not available with
a temperature lower than 40° C.
PREWASH
• Use this function to add a prewash
phase before the washing phase. We
recommend that you use this function
.