AEG L 98685 FL 사용자 설명서 - 페이지 31

{카테고리_이름} AEG L 98685 FL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG L 98685 FL 40 페이지. Front-loading washing machine
AEG L 98685 FL에 대해서도 마찬가지입니다: 사용자 설명서 (44 페이지), 사용자 설명서 (40 페이지)

페이지 인쇄

Problem

The internal lamp is

off.

After a steam pro-

gramme, garments are

partially wet.

After a steam pro-

gramme, garments are

not sufficiently

smooth.

The drum is empty

and the display shows

there is some weight

in .

The drum is full but

the display shows 0.0

kg.

After the check, activate the appliance. The programme continues from the point of inter-

ruption.

If the problem occurs again, contact the service centre.

If the display shows other alarm message, contact the service centre.

Service

We recommend that you write the information here:

Model

(MOD.)

Possible cause

You did not remove the stub-

born stains before you wash

the laundry.

You set a not correct tempera-

ture.

Too much laundry load.

The lamp is burned.

The appliance is not accurately

levelled.

A wrong STEAM programme

has been selected (e.g. Syn-

thetic instead of Cotton).

Excessive laundry load.

It is necessary to set a tare.

You loaded the laundry before

to activate the appliance.

Trouble shooter and service

Possible solution

Use special products to remove the

stubborn stains.

Make sure that you set the correct tem-

perature.

Decrease the laundry load.

To replace the lamp, contact the service

centre.

Check the levelling and adjust the appli-

ance by raising or lowering the feet.

Note the composition of the fabric.

Reduce the laundry load

Press button

ance and to activate it again.

Press button

ance . Empty the drum and obey to the

necessary steps. (Refer to 'Loading the

laundy')

• Refer to the information supplied with

this appliance for guarantee condition

and point of contact. The information to

give to the service is on the rating plate.

..................

to deactivate the appli-