Brother QL 570 - P-Touch B/W Direct Thermal Printer 설정 및 운영 매뉴얼 - 페이지 13

{카테고리_이름} Brother QL 570 - P-Touch B/W Direct Thermal Printer에 대한 설정 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother QL 570 - P-Touch B/W Direct Thermal Printer 43 페이지. Professional label printer
Brother QL 570 - P-Touch B/W Direct Thermal Printer에 대해서도 마찬가지입니다: 브로셔 (4 페이지), 사용자 설명서 (36 페이지), 사용자 설명서 (26 페이지), 사용자 설명서 (40 페이지), 설정 및 운영 매뉴얼 (45 페이지), 사용자 설명서 (2 페이지), 소프트웨어 설치 매뉴얼 (15 페이지)

페이지 인쇄
Brother QL 570 - P-Touch B/W Direct Thermal Printer 설정 및 운영 매뉴얼

6 Using Interface Cable

RS-232C cable and Network cable are not standard accessories.
Choose the appropriate cable for your interface.
USB cable
•
Use the enclosed interface cable.
RS-232C cable (QL-580N)
•
Do not use an interface cable that is longer than 6 feet (2.0 meters).
For details, see "Appendix - Serial Cables" of the User's Guide.
Network cable (QL-580N)
•
Use a straight-through Category5 (or greater) twisted-pair cable for
10BASE-T or 100BASE-TX Fast Ethernet Network.
Important
The enclosed interface cable should be used in order to ensure
compliance with the limits for EMC.
A shielded interface cable should be used in order to ensure compliance
with the limits for EMC.
Changes or modifications not expressly approved by Brother Industries,
Ltd. could void the user's authority to operate the equipment.
•
Caution for LAN connections
Do not connect this machine to a LAN connection which is subject to overvoltages.
•
Caution for RS-232C connection
The RS-232C serial connector part of this equipment is not Limited Power Source.
11

STEP

1
STEP
2
STEP
3
STEP
4