Brother QL-1100 빠른 설정 매뉴얼 - 페이지 6

{카테고리_이름} Brother QL-1100에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother QL-1100 9 페이지.
Brother QL-1100에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (9 페이지)

페이지 인쇄
Brother QL-1100 빠른 설정 매뉴얼

Connect the Printer to a Computer

You can connect the printer to a Windows computer or Mac using a USB cable.
Connect Using USB
1.
Before connecting the USB cable, make sure that the
printer is turned Off.
2.
Connect the USB cable to the USB port on the back of
the printer and on the computer.
3.
Turn the printer On.
NOTE
For more information, see the User's Guide.
8. Use the Printer with a Computer (P-touch Editor Lite) (Windows only)
1.
Turn the printer On, then press and hold the P-touch
Editor Lite Button until the green P-touch Editor Lite
LED turns On.
NOTE
P-touch Editor Lite is set to Off as the default mode.
2.
Connect the USB cable to your computer.
NOTE
If you are connecting the printer using a USB cable, it may not be detected correctly. If this happens, unplug the USB
cable, make sure the printer is On, and then reconnect the USB cable.
2
1. Editor Lite LED
2. Editor Lite Button
1