Brother QL-700 소프트웨어 사용 설명서 - 페이지 25
{카테고리_이름} Brother QL-700에 대한 소프트웨어 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother QL-700 40 페이지. Ql series
Brother QL-700에 대해서도 마찬가지입니다: 사용자 설명서 (8 페이지), 빠른 설정 매뉴얼 (2 페이지), 소프트웨어 사용 설명서 (48 페이지), 빠른 설정 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (8 페이지)
페이지 인쇄
Transfer the templates to the printer via the network
(QL-580N / 1060N only)
To transfer the templates to the printer via the network, you need BRAdmin Professional or Web BRAdmin.
Download it from our website first.
The printer names and pictures in the following screens may differ from your purchased printer. The screens
may vary depending on the model.
1
Create the template you want to transfer with P-touch Editor 5.0, then choose [File]-
[Transfer Template...] menu to register.
2
Click
to save the registered template in .blf format.
3
Start BRAdmin Professional (1) or Web BRAdmin (2).
(1) Choose the printer and [Load Firmware]
from the [Control] menu.
4
Choose Load Firmware function of the BRAdmin Professional (1) or Web BRAdmin (2).
(1) Choose [TFTP PUT] and click the
[OK] button.
5
Choose the file in .blf format which you saved in step 3 and load it to the printer.
(1) Choose the .blf file and click the [OK]
button.
The default password is "access".
(2) Choose the printer and click the [Open]
button in the lower part of the screen.
(2) Click the [Load Firmware] button in
the upper part of the screen.
(2) Choose the .blf file and click the [Submit]
button.
24
Transfer the templates to the printer via the network (QL-580N /
1060N only)