Brother QL-720NW 사용자 설명서 - 페이지 12

{카테고리_이름} Brother QL-720NW에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother QL-720NW 23 페이지. Label printer
Brother QL-720NW에 대해서도 마찬가지입니다: 네트워크 사용 설명서 (48 페이지), 소프트웨어 사용 설명서 (48 페이지), 사용자 설명서 (23 페이지), 빠른 설정 매뉴얼 (38 페이지)

6 Mass Storage (QL-720NW only)

Description

The mass storage feature allows you to execute commands by sending data from a

computer or other device to the printer via USB. Files that have been copied to the

printer's mass storage area are processed when you press the Wi-Fi button.

This feature is useful in the following situations.

•

When you want to apply settings that are stored in a command file (".bin" format) or

templates that are stored in ".blf" format that were distributed by the administrator without

using a customized tool.

•

When you want to execute commands without installing the printer driver.

•

When you want to use a device with an OS (including non-Windows operating systems)

that has a USB host feature to print and transmit data.

Using the Mass Storage Feature

Confirm that the printer is turned off.

While holding down the Wi-Fi button, press and hold the power

button.

When the Status and Wi-Fi lamps start to flash in green, release the

Wi-Fi and power buttons.

After the lamps flash a few times, the Status lamp lights in green

automatically.

Connect the computer or device to the printer via USB. The printer's

mass storage area is displayed on the computer or device's screen.

If the mass storage area is not displayed automatically, refer to the operating

instructions for the computer or device's operating system for information about

displaying the mass storage area.

Drag and drop the file you want to copy to the mass storage area.

Press the Wi-Fi button. The command file is executed. While the file

is being executed, the Wi-Fi lamp lights in green.

After the file has been executed, the Wi-Fi lamp turns off.

To turn mass storage mode off, turn the printer off.

The printer will start up in its normal operating mode.