Brother TD-4100N 네트워크 사용 설명서 - 페이지 19

{카테고리_이름} Brother TD-4100N에 대한 네트워크 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother TD-4100N 39 페이지. Network users manual - spanish
Brother TD-4100N에 대해서도 마찬가지입니다: 기술 사양 (4 페이지), 소프트웨어 사용 설명서 (40 페이지), 사용자 설명서 (36 페이지), 사용자 설명서 (37 페이지), 매뉴얼 (20 페이지), (스페인어) 구 (40 페이지), (스페인어) 매뉴얼 델 유저리오 (39 페이지)

Type http://printer_ip_address/ into your browser. (Where printer_ip_address is the IP

address or the print server name)

For example:

http://192.168.1.2/ (if the printer's IP address is 192.168.1.2.)

Note

If you have edited the hosts file on your computer or are using a Domain Name System, you can also enter

the DNS name of the print server. As the print server supports TCP/IP and NetBIOS, you can also enter

the NetBIOS name of the print server. The NetBIOS name can be seen on the printer settings page. The

NetBIOS name assigned is the first 15 characters of the node name and by default it will appear as

"BRNxxxxxxxxxxxx" where "xxxxxxxxxxxx" is the Ethernet address.

Click Network Configuration.

Enter a user name and a password. The User Name is admin and the default Password is access.

Click OK.

You can now change the print server settings.

Printing the Printer Settings

The Printer Settings Page prints a report listing the network settings, etc. You can print the Printer Settings

Page using the cut button of the printer.

Note

Node name: Node name appears in the Printer Settings Page. The default Node name of the network card

in the printer is "BRNxxxxxxxxxxxx" where "xxxxxxxxxxxx" is the Ethernet address.

Make sure that the Roll is set and the front cover is closed.

To print the Printer Settings Page, we recommend to use 4" Roll.

Turn on the printer.

Press and hold the Cut button.

You can check the IP address, etc.

Note

• To reset network setting and turn APIPA ON

Press the ON/OFF button to switch the machine OFF. Then, hold down the ON/OFF button for two

seconds. Continue holding down the ON/OFF button, and press the CUT button twice. All the network

settings will be reset.

• To reset network setting and turn APIPA OFF

Press the ON/OFF button to switch the machine OFF. Then, hold down the ON/OFF button for two

seconds. Continue holding down the ON/OFF button, and press the CUT button four times. All the network

settings will be reset.

Configuring your network printer