Fujitsu S6240 바이오스 매뉴얼 - 페이지 7

{카테고리_이름} Fujitsu S6240에 대한 바이오스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu S6240 29 페이지. Lifebook s series

Fujitsu S6240 바이오스 매뉴얼
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies what primary
devices are installed.
Main
Primary Master [MATSHITADVD-RAM UJ-840S-(PM)]
Type:
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
F1
Help
ESC
Exit
Table 3: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Type:
Auto
None
Multi-Sector
Disabled
Transfers:
2 Sectors
4 Sectors
8 Sectors
16 Sectors
LBA Mode
Disabled
Control:
Enabled
Note that actual hard drive label shown may vary.
Depending on the drive type, information such as cylin-
ders, heads and sectors may also be displayed.
PhoenixBIOS Setup Utility
[Auto]
[Disabled]
[Disabled]
[Standard]
[Disabled]
Select Item
-/Space
Change Values
Select Menu
Enter
Select
Figure 3. Primary Master Submenu
Default
Description
[Auto]
Selects the ATA/ATAPI device type. Select Auto to have the device (CD-
ROM, CD-R/RW, DVD-ROM, etc.) automatically identified by the BIOS
at POST. If None is selected, the following Set-up items do not appear.
[Disabled]
This option cannot be changed when Auto is selected. Specify the num-
ber of sectors per block for multiple sector transfer.
[Disabled]
Enables or disables Logical Block Addressing in place of Cylinder, Head,
Sector addressing. This option cannot be changed when Auto is selected.
7
M a i n M e n u
Item Specific Help
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
F9
Setup Defaults
Sub-Menu
F10
Save and Exit